GB/T 6412-2009Test method for household coal and stoves (English PDF)
家庭用煤及炉具试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 6412-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 30, 2009
Implementation date
April 1, 2010
Scope
GB/T 6412-2009 is the English-translated version of 家庭用煤及炉具试验方法.
GB/T 6412-2009 is the Chinese standard "Test method for household coal and stoves".
Its scope clause reads: This standard specifies the household coal and coal-fired household stoves used in the process of evaluating the performance of the terms and definitions, symbols, performance Test principle and test evaluation indicators, test conditions, test procedures and calculation methods and evaluation of test results.
This standard applies to the determination of domestic coal and coal-fueled household appliances (hereinafter referred to as stoves) performance indicators. Its clauses include terms and definitions, symbols.
Found what you need?
Document preview — GB/T 6412-2009
National Standard of the People's Republic of China
- ICS
- 73.040
- Classification
- D 20
- Replacing
- GB/T 6412-1986
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions, symbols
- 3.1 Terms and Definitions
1 Scope
This standard specifies the household coal and coal-fired household stoves used in the process of evaluating the performance of the terms and definitions, symbols, performance
Test principle and test evaluation indicators, test conditions, test procedures and calculation methods and evaluation of test results.
This standard applies to the determination of domestic coal and coal-fueled household appliances (hereinafter referred to as stoves) performance indicators.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB /Determination of total moisture in coal of T 211 (GB/T 211-2007, ISO 589.2003, NEQ)
GB/T 212 industrial analysis of coal (GB/T 212-2008, ISO 11722.1999, NEQ)
GB/T 213 Determination of calorific value of coal (GB/T 213-2008, ISO 1928.1995, MOD)
GB/T 214 Determination of total sulfur in coal (GB/T 214-2007, ISO 334.1992, ISO 351.1996, NEQ)
GB/T 476 Determination of carbon and hydrogen in coal (GB/T 476-2008, ISO 625.1996, MOD)
GB/T 13593 Civil briquette (GB/T 13593-1992)
3 Terms and definitions, symbols
3.1 Terms and Definitions
The following terms and definitions apply to this standard.
3.1.1
Coal-fired stoves with heat supplied from the heating temperature evaporation pan 25 °C to 55 °C time required.
Note. The ignition timing expressed in points.
3.1.2
Coal-fired stoves with heat supplied, the evaporation temperature of the pot is heated to the desired time from 25 °C 80 °C.
Note. The time indicated by lit points.
3.1.3
Coal-fired stoves with heat supplied, the evaporation temperature of the pot from boiling point drops below the boiling point of time of 2 °C.
Note. time expressed in minutes stir.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of GB/T 6412
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 6412-2009 | Test method for household coal and stoves | current edition | Current |
| GB/T 6412-1986 | Test method for household coal and stoves | previous edition | Superseded |
This page sells the current edition, GB/T 6412-2009. Earlier editions are listed for reference only.
How to Download GB/T 6412-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 6412-2009
$215.00