GB/T 6100-2007Test method for linear density of cotton fibres - Cut middles method (English PDF)
棉纤维线密度试验方法 中段称重法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 6100-2007 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 31, 2007
Implementation date
December 1, 2007
Scope
GB/T 6100-2007 is the English-translated version of 棉纤维线密度试验方法 中段称重法.
GB/T 6100-2007 is the Chinese standard "Test method for linear density of cotton fibres - Cut middles method". Its scope clause reads: This standard specifies the test methods for test middles method using cotton fiber linear density.
This standard applies to the laboratory measurement of linear density of cotton fiber. Its clauses include terms and definitions; test equipment and tools; standard conditioning and testing atmosphere.
Found what you need?
Document preview — GB/T 6100-2007
National Standard of the People's Republic of China
- ICS
- 59.060.10
- Classification
- B 32
- Replacing
- GB/T 6100-1985
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 5 Test equipment and tools
- 6 Standard conditioning and testing atmosphere
1 Scope
This standard specifies the test methods for test middles method using cotton fiber linear density.
This standard applies to the laboratory measurement of linear density of cotton fiber.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 6097 sampling cotton fiber test methods
GB/T 8170 numerical rounding rules
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Yarn or fiber mass per unit length.
3.2
Represents a unit of linear density, of 1000m fiber or yarn has a mass (g).
Principle 4
According to the definition of a linear density of cotton fiber, cut a bunch of fixed long fibers, called the quality, count the number of its roots, to calculate the linear density of cotton fiber
The average degree.
5 Test equipment and tools
10 5.1 m1 m1 cutter
Accuracy of (10 ± 0.1) mm.
5.2 microscope or projector
Magnification is 150 to 200 times.
5.3 torsion balance
The largest weighing 10mg, dividing the value of 0.02mg; or electronic balance, a sense of the amount of 0.01mg.
5.4 Other Tools
Oven, counter, pile limiter plate, thin comb (10 stitches/cm), dense comb (20-pin/cm), One clamps, clips, tweezers, 50mm fiber
Ruler and slides and the like.
6 Standard conditioning and testing atmosphere
6.1
Test samples should be placed in 45 °C ~ 50 °C The humidity oven pre-treatment time was 0.5h. Regain If the test sample is less than standard […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 6100
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 6100-2007 | Test method for linear density of cotton fibres - Cut middles method | current edition | Current |
| GB/T 6100-1985 | Test method for linear density of cotton fibres - Cut middles method | previous edition | Superseded |
This page sells the current edition, GB/T 6100-2007. Earlier editions are listed for reference only.
How to Download GB/T 6100-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 6100-2007
$105.00