GB/T 6080.2-2010Machine hacksaw blades - Part 2: Technical specifications (English PDF)
机用锯条 第2部分：技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 6080.2-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 23, 2010
Implementation date
July 1, 2011
Scope
GB/T 6080.2-2010 is the English-translated version of 机用锯条 第2部分：技术条件.
GB/T 6080.2-2010 is the Chinese standard "Machine hacksaw blades - Part 2: Technical specifications". Its scope clause reads: GB/T 6080 This section provides the machine with the blade size, material and hardness, appearance, marking and packaging of technical requirements.
This section applies in accordance with GB/T 6080.1 production machine saw. Its clauses include dimensions; material and hardness.
Found what you need?
Document preview — GB/T 6080.2-2010
National Standard of the People's Republic of China
- ICS
- 25.100.40
- Classification
- J 41
- Replacing
- GB/T 6080.2-1998
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Dimensions
- 4 material and hardness
1 Scope
GB/T 6080 This section provides the machine with the blade size, material and hardness, appearance, marking and packaging of technical requirements.
This section applies in accordance with GB/T 6080.1 production machine saw.
2 Normative references
The following documents contain provisions which, through reference to GB/T 6080 to the present, constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 6080.1 machine saw Part 1. The types and dimensions (GB/T 6080.1-2010, ISO 2336-2.2006,
Hacksawblades-Part 2. Dimensionsformachineblades, IDT)
3 Dimensions
3.1
Table 1 machine with a saw blade shape and position tolerances.
Table 1 millimeters length l1 tolerance
Side flatness straightness knife-like side lateral bending
1.0
1.5
2.0
0.1
1.0
1.5
1.8
2.0
3.2 h and the amount of tooth custom tolerances by the manufacturer, sub-tooth symmetry than or equal to 0.2mm.
4 material and hardness
Machine saw high-speed steel, hardness distribution according to Figure 1.
Area A. <=48HRC;
Area B. >=63HRC.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of GB/T 6080.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 6080.2-2010 | Machine hacksaw blades - Part 2: Technical specifications | current edition | Current |
| GB/T 6080.2-1998 | Machine hacksaw blades - Part 2: Technical specifications | previous edition | Superseded |
This page sells the current edition, GB/T 6080.2-2010. Earlier editions are listed for reference only.
How to Download GB/T 6080.2-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6080.1-2010 — Machine hacksaw blades -- Part 1: Types and dimensions
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 6080.2-2010
$105.00