Valid

GB/T 5949-2014Test method for bubble and air line of transparent quartz glass (English PDF)

透明石英玻璃气泡、气线试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 5949-2014 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 24, 2014

Implementation date

March 1, 2015

Scope

GB/T 5949-2014 is the English-translated version of 透明石英玻璃气泡、气线试验方法.

GB/T 5949-2014 is the Chinese standard "Test method for bubble and air line of transparent quartz glass". Its scope clause reads: This standard specifies the transparent quartz glass bubble, instruments and materials gas line tests, sample requirements, test procedures and test results processing report.

This standard applies to transparent quartz glass bubbles, gas line tests. For contour defects (such as crystallization, spots, dark scars, stones Etc.) can also refer to this standard.

Its clauses include apparatus and materials; sample requirements; test procedure; results processing.

Found what you need?

Document preview — GB/T 5949-2014

National Standard of the People's Republic of China

ICS
81.040
Classification
Q 35
Replacing
GB 5949-1986

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Apparatus and materials
  • 3 Sample Requirements
  • 4 Test Procedure
  • 5 results processing

1 Scope

This standard specifies the transparent quartz glass bubble, instruments and materials gas line tests, sample requirements, test procedures and test results processing report.

This standard applies to transparent quartz glass bubbles, gas line tests. For contour defects (such as crystallization, spots, dark scars, stones

Etc.) can also refer to this standard.

2 Apparatus and materials

2.1 Projectors

magnification of 10 to 100 times its precision bench micrometer drum is 0.01mm.

If desired, can be equally accurate reading microscope, measuring microscope.

2.2

gauze, lens cleaning paper, ethanol.

3 Sample Requirements

Quartz glass. When necessary, cut from the article, opaque surface when the test should be mechanically polished.

4 Test Procedure

4.1

with a lens cleaning paper to wipe clean the surface of the sample, with gauze dipped ethanol, if necessary, wipe the dirt surface of the sample to be tested again

With a lens cleaning paper or gauze wipe clean.

4.2

Sample visually identify the location of the test, make a mark.

4.3

test bubble, line size and density of the gas, select the appropriate magnification were measured.

4.4

from the sample surface began to adjust the focus, determination marked by the inner diameter of the bubble level, gas line length and width as well as bubbles of gas lines the amount. When measured, the rotary table screw micrometer drum, instrument markings are projected coordinate with bubbles, gas lines clear outline of the left and right, up and down

Side tangent, record the micrometer drum bubble, gas line readings left and right side, up and down the side reading. Each diameter measuring irregularly shaped bubbles

Point of not less than three.

4.5

Determination of the depth distribution of the bubbles, the gas line, first tune the instrument focus on the surface of the sample and record the readings (l0), and then focus to the selected

Bubbles, gas line, measured reading (l1) in the depth direction.

5 results processing

5.1

Record maximum bubble diameter, width and length of the gas line, the number of bubbles, the gas line depth required records.

5.2

micrometer drum bubble, gas line difference between the two readings of the left and right side of the bubble diameter gas line width. For irregularly shaped bubbles, taking

The maximum diameter of the bubble diameter. Difference under the gas line side readings of the length of the gas line.

5.3

bubble, gas line depth according to equation (1).

a = n (l1-l0) (1)

Where.

a --- bubbles, gas line layer to the depth of the sample surface, in millimeters (mm);

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of GB/T 5949

EditionTitleRevisionStatus
GB/T 5949-2014Test method for bubble and air line of transparent quartz glasscurrent editionCurrent
GB 5949-1986Test method for bubble and air line of transparent quartz glassprevious editionSuperseded

This page sells the current edition, GB/T 5949-2014. Earlier editions are listed for reference only.

How to Download GB/T 5949-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 5949-2014

$55.00