GB/T 5584.3-2009Rectangular copper or aluminium and its alloy wires for electrical purposes - Part 3: Aluminium rectanglar wire (English PDF)

1 Scope

GB/T 5584 provisions of this part of the electrician aluminum flat wire models, specifications, technical requirements, test and delivery requirements.

This section applies to electric and aluminum flat wire.

This section should be used in conjunction with the GB/T 5584.1-2009.

2 Normative references

The following documents contain provisions which, through reference to GB/T 5584 to the present, constitute provisions of this section. Everything dated references article

Member, all subsequent amendments (not including errata content) or revised edition are not used in this section, however, encouraged to reach under this section

Parties to research agreement can use the latest versions of these files. For undated reference documents, the latest versions apply to this section.

GB/T 3048.2-2007 metal conductor wire and cable resistivity test methods (IEC 60468. 1974, MOD)

GB/T 4909.2-2009 Test methods for bare wires - Part 2. Measure

GB/T 4909.3-2009 Test methods for bare wires - Part 3. Tensile Test

GB/T 4909.6-2009 Test methods for bare wires - Part 6. unidirectional bending bending test ---

GB/T 5584.1-2009 electrician with copper, aluminum and its alloys flat wire - Part 1. General requirements

3 Use Guidelines

This section provides an aluminum flat wire, either as a finished product, can also be an intermediate product. When used as an intermediate product, its size, the public

Poor surface condition and supplementary provisions by mutual agreement, or the development of supplementary provisions by the relevant authorities.

4 Model

Aluminum flat wire models are shown in Table 1.

Table 1 Model

Type the name of the state

LBR LBY2

LBY4

LBY4

H2

H4

H8

Soft aluminum flat wire

H2 Status hard aluminum flat wire

H4 state hard aluminum flat wire

H8 state hard aluminum flat wire

5 Specifications

Aluminum flat wire should meet the specifications of GB/T 5584.1-2009 requirements.

6 Technical Requirements