GB/T 46532-2025Energy measurement devices on board urban rail transit vehicles (English PDF)
城市轨道交通车载电能计量装置
This is a limited preview
Buy now to download the full PDF (28 pages)
Need quotation for your management?
Get a formal quotation for GB/T 46532-2025 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 31, 2025
Implementation date
May 1, 2026
Scope
GB/T 46532-2025 is the English-translated version of 城市轨道交通车载电能计量装置.
GB/T 46532-2025 is the Chinese standard "Energy measurement devices on board urban rail transit vehicles". Its scope clause reads: This document specifies the usage conditions, device composition and requirements, technical requirements, and testing methods for onboard energy metering devices in urban rail transit vehicles.
Laws, inspection rules, marking, packaging, transportation and storage. This document applies to the design, manufacture, and inspection of onboard power metering devices for urban rail transit vehicles with DC power supply systems. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 46532-2025
National Standard of the People's Republic of China
- ICS
- 45.060
- Classification
- S 35
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1.Scope
- 2 Normative References
- 3.Terms and Definitions
- 4.Usage conditions
- 4.1 Environmental Conditions
- 4.2 Power Requirements
- 5.Device Composition and Requirements
- 5.1 Device Composition
- 5.2 Equipment Requirements
- 6.Technical Requirements
- 7.Test Methods
- 7.1 Inspection of appearance and installation dimensions
- 7.2 Performance Tests
- 7.3 Power Supply Overvoltage Test
- 7.4 Power and Power Supply Efficiency Test
- 7.5 Low Temperature Test
- 7.6 High Temperature Test
- 7.7 Alternating Damp Heat Test
- 7.8 Salt spray test
- 7.9 Fire resistance performance test
- 7.10 Electromagnetic Compatibility Test
- 7.11 Insulation Test
- 7.12 Shock and vibration tests
- 7.13 Protection Level Test
- 7.14 No-load condition test
- 7.15 Start-up Condition Test
- 7.16 Clock timing error test
- 7.17 Sensor Response Time Test
- 7.18 Positioning Error Test
- 7.19 Communication Experiment
- 7.20 Accuracy Test
- 7.21 Low-temperature storage test
- 8.Inspection Rule
- 8.1 Inspection Classification
- 8.2 Type Testing
- 8.3 Factory Inspection
- 8.4 Inspection Item
- 9.Marking, Packaging, Transportation and Storage
- 9.1 Mark
- 9.2 Packaging
- 9.3 Transportation and Storage
- Appendix A (Informative) Voltage and Current Sensor Data Acquisition Locations
- References
1 Scope
This document specifies the usage conditions, device composition and requirements, technical requirements, and testing methods for onboard energy metering devices in urban rail transit vehicles.
Laws, inspection rules, marking, packaging, transportation and storage.
This document applies to the design, manufacture, and inspection of onboard power metering devices for urban rail transit vehicles with DC power supply systems.
2 Normative references
The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.
For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.
This document.
GB/T 191 Pictorial Symbols for Packaging and Storage
GB/T 1402 Voltage of Traction Power Supply System for Rail Transit
GB/T 4208-2017 Degrees of protection provided by enclosures (IP code)
GB/T 13384 General Technical Requirements for Packaging of Mechanical and Electrical Products
GB/T 21413.1 Electrical equipment for rail transit locomotives and rolling stock - Part 1.General operating conditions and general rules
GB/T 24338.4 Electromagnetic compatibility of rail transit - Part 3-2.Locomotive and rolling stock equipment
GB/T 25119-2021 Electronic devices for rail transit locomotives and rolling stock
GB/T 28029.4 Rail Transit Electronic Equipment - Train Communication Network (TCN) - Part 2-3.TCN Communication Protocol
GB/T 28029.9 Rail transit electronic equipment - Train communication network (TCN) - Part 3-1.Multifunction vehicle bus (MVB)
GB/T 28029.10 Rail Transit Electronic Equipment - Train Communication Network (TCN) - Part 3-2.Multifunctional Vehicle Bus (MVB) Consistency Testing
GB/T 28029.12 Rail Transit Electronic Equipment - Train Communication Network (TCN) - Part 3-4.Ethernet Assembly Network (ECN)
GB/T 32347.1 Environmental conditions for rail transit equipment - Part 1.Locomotive and rolling stock equipment
GB/T 32350.1 Railway Transportation - Insulation Coordination - Part 1.Basic Requirements - Clearances and Creepage Distances for Electrical and Electronic Equipment
GB/T 44639.1-2024 Electrical power measurement system for rail transit trains - Part 1.General principles
GB/T 44639.2-2024 Electrical energy measurement system for rail transit trains - Part 2.Electrical energy measurement
CJ/T 416 Fire Protection Requirements for Urban Rail Transit Vehicles
IEC 61375-2-8 Rail transport electronic equipment - Train communication network (TCN) - Part 2-8.TCN conformance testing (IEC -
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Traction input energy
The train traction system obtains electrical energy from the overhead contact line or contact rail.
GB/T 44386 | GB/T 36287 | GB/T 34574 | GB/T 47161 | GB/T 46713.3 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 28 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1402Railway applications - Supply voltages of traction systems
- GB/T 4208-2017Degrees of protection provided by enclosures (IP code)
- GB/T 13384General specifications for packing of mechanical and electrical product
- GB/T 21413.1Railway applications -- Electric equipment for rolling stock -- Part 1: General service conditions and general rules
- GB/T 24338.4Railway applications -- Electromagnetic compatibility -- Part 3-2: Rolling stock -- Apparatus
IEC 61375
Editions of GB/T 46532
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 46532-2025 | Energy measurement device on board of urban rail transit | current edition | Current |
This page sells the current edition, GB/T 46532-2025. Earlier editions are listed for reference only.
How to Download GB/T 46532-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 1402-2025 — Railway applications - Supply voltages of traction systems
GB/T 14020-2024 — Hydrogenated rosin
Secure payment via Stripe
Payments accepted
GB/T 46532-2025
$450.00