Partners save 15% on every standard

Valid

GB/T 44727-2024Technical specification for reused parts removal of end-of-life vehicles (English PDF)

报废机动车回用件拆卸技术规范

Open the GB/T 44727-2024 preview as PDF

Preview — first pages of GB/T 44727-2024 (full document: 15 pages)

This is a limited preview

Buy now to download the full PDF (15 pages)

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 26, 2024

Implementation date

October 26, 2024

Scope

GB/T 44727-2024 is the English-translated version of 报废机动车回用件拆卸技术规范.

GB/T 44727-2024 is the Chinese national standard covering the parts taken off a scrapped vehicle so they can be sold and fitted again — the general requirements and the process flow, what is done before, during and after removal, the restraint methods of Annex A and how each is released, the tools, the cleaning methods, the quality assurance, and the verification methods, since a part levered off the wrong way leaves the yard as scrap. First edition, under the Ministry of Commerce. In force from 26 October 2024. Issued on 26 October 2024, it has been in force since 26 October 2024.

Document preview — GB/T 44727-2024

National Standard of the People's Republic of China

ICS: 13.030.50
Classification: Z 05

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface... III 1 Scope1
2 Normative references1
3 Terms and Definitions1
4 General Requirements2
5 Process Flow2
6 Assignment Requirements2
6.1 Before disassembly2
6.2 Disassembly3
6.3 After disassembly3
7 Quality Assurance3
8 Verification Methods4
Appendix A (Normative) Main restraint methods and their disassembly methods5
Appendix B (Informative) Disassembly Method Examples6
Appendix C (Informative) Examples of Disassembly Tools7
Appendix D (Normative) Main Cleaning Methods8
References9

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting is required.

Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.

This document is proposed and coordinated by the Ministry of Commerce of the People's Republic of China.

This document was drafted by: Wuxi Xinsanzhou Recycling Resources Co., Ltd., China Materials Recycling Association, Huzhou Meixinda Circular Industry Development Co., Ltd.

Co., Ltd., Wuhan University of Technology, Wuxi Suguang Auto Parts Technology Co., Ltd., China Railway Materials Resources Technology Co., Ltd., Jiangsu Fenghuo Digital Technology Co., Ltd., Hubei Longzhong Laboratory.

The main drafters of this document are: Qin Xunpeng, Jiang Bolun, Xu Junxiang, Yu Keli, Cui Yan, Luo Yan, He Ruoqiu, Fang Mingkang, Shen Yong, Wu Qiang, Wu Mengwu, Bao Xudong, Yamazhong, Huang Bin, Yan Peige, Hu Zeqi, Liu He, and Liu Kexin.

Technical specifications for disassembly of recycled parts from scrapped motor vehicles

1 Scope

This document specifies the overall requirements, process flow, operation requirements and quality assurance for the disassembly of recycled parts from scrapped motor vehicles, and describes the corresponding Verification method.

This document applies to the disassembly process of scrapped motor vehicle recycled parts by scrapped motor vehicle recycling and dismantling enterprises and recycled parts service enterprises.

2 Normative references

GB 22128

GB/T 26989

GB/T 34015.2

GB 50037-2013

GB/T 44728

3 Terms and Definitions

The terms and definitions defined in GB 22128, GB/T 26989 and the following apply to this document.

3.1 reused parts

Reusable parts removed from scrapped motor vehicles. [Source. GB 22128-2019, 3.11]

3.2 Dismantling

Dispose of scrapped motor vehicles harmlessly, dismantle the main assemblies and reusable parts, and disassemble or The process of flattening. [Source. GB 22128-2019, 3.4]

3.3 removal

The operation of separating and removing parts from an assembly such as a motor vehicle, assembly or component.

[Source. GB/T 26989-2011, 2.1.3, modified]

3.4 reused parts service enterprise

An organization engaged in the sales and after-sales service of recycled parts and possessing the technical service capabilities of disassembly, cleaning, and testing of recycled parts.

Note. Recycled parts come from scrapped motor vehicle recycling and dismantling companies.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB 50037-2013

Cited by

GB/T 45193-2024General technical specification for reused parts of end-of-life vehicles

Editions of GB/T 44727

Edition	Title	Revision	Status
GB/T 44727-2024	Technical specification for reused parts removal of end-of-life vehicles	current edition	Current

This page sells the current edition, GB/T 44727-2024. Earlier editions are listed for reference only.

How to Buy GB/T 44727-2024

1Add to cart. Click the "Buy GB/T 44727-2024" button on this page. You can add more standards before checkout.
2Checkout. Enter your email and billing details. Payment is processed securely by Stripe (cards, Apple Pay, Google Pay supported).
3Instant delivery (0–9 sec). Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4Invoice included. A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.