Valid

GB/T 43758.1-2024Technical specifications for driving safety test environment for intelligent and connected vehicles—Part 1: Public road (English PDF)

智能网联汽车运行安全测试环境技术条件 第1部分:公共道路

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 43758.1-2024 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 15, 2024

Implementation date

October 1, 2024

Scope

GB/T 43758.1-2024 is the English-translated version of 智能网联汽车运行安全测试环境技术条件 第1部分:公共道路.

GB/T 43758.1-2024 is the Chinese standard "Technical specifications for driving safety test environment for intelligent and connected vehicles—Part 1: Public road".

Its scope clause reads: This document specifies the road environment, traffic facilities, traffic control, road lighting, Requirements for traffic operation, road monitoring and communication, and testing assurance.

This document applies to Level 3 driving automation (conditional autonomous driving) and above intelligent network vehicles specified in GB/T 40429-2021.

The selection, construction and determination of public roads for the safety test of connected vehicle operation; the selection, construction and determination of public roads required for the demonstration application of intelligent connected vehicles Construction and confirmation for reference. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 43758.1-2024

National Standard of the People's Republic of China

ICS
43.020
Classification
R 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Road environment requirements
  • 4.1 General requirements
  • 4.2 Urban roads
  • 4.3 Highway
  • 4.4 Surrounding Environment
  • 5.Traffic facilities requirements
  • 6 Traffic Control Requirements
  • 6.1 General requirements
  • 6.2 Urban roads
  • 6.3 Highway
  • 7 Road lighting requirements
  • 8 Traffic operation requirements
  • 8.1 General requirements
  • 8.2 Urban roads
  • 8.3 Highway
  • 9 Road Monitoring and Communication Requirements
  • 9.1 General requirements
  • 9.2 Monitoring Perception
  • 9.3 Communication Network
  • 9.4 High-precision positioning network
  • 10 Test Assurance Requirements
  • Appendix A (Informative) Special Signs for Public Test Roads
  • Appendix B (Informative) Traffic congestion classification of public test roads
  • Appendix C (Informative) Public Test Road Safety Driving Ability Test Items

1 Scope

This document specifies the road environment, traffic facilities, traffic control, road lighting,

Requirements for traffic operation, road monitoring and communication, and testing assurance.

This document applies to Level 3 driving automation (conditional autonomous driving) and above intelligent network vehicles specified in GB/T 40429-2021.

The selection, construction and determination of public roads for the safety test of connected vehicle operation; the selection, construction and determination of public roads required for the demonstration application of intelligent connected vehicles

Construction and confirmation for reference.

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in this document.

For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to

This document.

GB 5768.2 Road traffic signs and markings Part 2.Road traffic signs

GB 5768.3 Road traffic signs and markings Part 3.Road traffic markings

GB 14886 Specification for the setting and installation of road traffic lights

GB 14887 Road traffic lights

GB/T 22239-2019 Information security technology - Basic requirements for cybersecurity level protection

GB/T 24969 Technical requirements for highway lighting

GB/T 35785 Specification for the installation of electronic identification reading and writing equipment for motor vehicles

GB/T 35786 General specification for motor vehicle electronic identification reading and writing equipment

GB/T 35787 Safety technical requirements for motor vehicle electronic identification reading and writing equipment

GB 50688 Code for Design of Urban Road Traffic Facilities

GB 51038 Specification for the installation of traffic signs and markings on urban roads

GB/T 43766 Technical requirements for operation safety testing of intelligent connected vehicles

CJJ37 Urban Road Engineering Design Code (2016 Edition)

CJJ45 Urban Road Lighting Design Standard

GA/T 496 General technical requirements for automatic red light running recording systems

GA/T 1743 Road traffic signal controller information release interface specification

JTGB 01 Highway Engineering Technical Standard

JTGD81 Highway Traffic Safety Facilities Design Specification

JTGD82 Specifications for setting up highway traffic signs and markings

YD/T 3847 Test methods for roadside equipment supporting direct communication based on LTE wireless communication technology for Internet of Vehicles

3 Terms and definitions

The terms and definitions defined in GB/T 43766 and the following apply to this document. […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Editions of GB/T 43758.1

EditionTitleRevisionStatus
GB/T 43758.1-2024Technical specifications for driving safety test environment for intelligent and connected vehicles - Part 1: Public roadcurrent editionCurrent

This page sells the current edition, GB/T 43758.1-2024. Earlier editions are listed for reference only.

How to Download GB/T 43758.1-2024

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 43758.1-2024

$240.00