GB/T 35787-2017Security technical requirement for the read-write equipment of electronic identification of motor vehicles (English PDF)
机动车电子标识读写设备安全技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35787-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35787-2017 is the English-translated version of 机动车电子标识读写设备安全技术要求.
GB/T 35787-2017 is the Chinese standard "Security technical requirement for the read-write equipment of the electronic identification of motor vehicles". Its scope clause reads: This Standard specifies the general security requirements, manufacturing and scrap disposal of the read-write equipment of the electronic identification of motor vehicles.
This Standard is applicable to the design, development, test and application of the read-write equipment and application system of the electric identification of motor vehicles.
Its clauses include terms and definitions; abbreviations; general requirements; manufacturing and scrap disposal. It was issued by the General Administration of Quality Supervision, Inspection and Quarantine on DECEMBER 29, 2017 and took effect on JULY 1, 2018.
Found what you need?
Document preview — GB/T 35787-2017
National Standard of the People's Republic of China
- ICS
- 35.240.15
- Classification
- L 80
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope4
- 2 Normative References4
- 3 Terms and Definitions4
- 4 Abbreviations5
- 5 General Requirements5
- 5.1 Requirements of Communication Security5
- 5.2 Basic Structure5
- 5.3 Cryptographic Algorithm6
- 5.4 Key Management6
- 5.5 Confidentiality6
- 5.6 Integrity6
- 5.7 Non-repudiation6
- 5.8 Identity Authentication7
- 5.9 Access Control7
- 5.10 Audit Record8
- 6 Manufacturing and Scrap Disposal8
- 6.1 Manufacturing8
- 6.2 Scrap Disposal8
Foreword
This Standard was drafted in accordance with the rules in GB/T 1.1-2009.
Please be noted that certain content in this document might involve patents. The institution that issues this document does not undertake the responsibility of identifying these patients.
1 Scope
This Standard specifies the general security requirements, manufacturing and scrap disposal of the read-write equipment of the electronic identification of motor vehicles.
This Standard is applicable to the design, development, test and application of the read-write equipment and application system of the electric identification of motor vehicles.
2 Normative References
The following documents are indispensable to the application of this Standard. In terms of references with a specified date, only versions with a specified date are applicable to this Standard. The latest version (including all the modifications) of references without a specified date is applicable to this Standard.
GB/T 35789.1-2017 General Specification for the Electronic Identification of Motor Vehicles - Part 1: Automobile
GM/T 0024 SSL VPN Specification
GM/T 0035.1-2014 Specifications of Cryptographic Application for RFID Systems - Part 1: Cryptographic Protection Framework and Security Levels
GM/T 0035.5 Specifications of Cryptographic Application for RFID Systems - Part
3 Terms and Definitions
What is defined in GB/T 35789.1-2017, and the following terms and definitions are applicable to this document.
3.1 Security Module
Security module refers to a component, which is imbedded in the read-write equipment and provides the function of cryptographic operation to the read-write equipment.
5 Specification for Key Management
5.3 Cryptographic Algorithm
Security module and PSAM card shall adopt cryptographic algorithm approved by national password management department.
5.4 Key Management
Key management shall comply with the following requirements.
a) The generation, input, storage, dispersion and usage of key shall comply with the requirement in GM/T 0035.5;
b) Key in the security module shall be managed by institutions authorized by public security organs;
c) Key in the PSAM card shall be managed by competent departments of application industries.
5.5 Confidentiality
5.5.1 Storage confidentiality
Storage confidentiality shall comply with the following requirements.
a) Sensitive information shall adopt cryptographic algorithm for encryption protection, so as to prevent unauthorized access;
b) Access permission information and keys shall be stored in the security module or the PSAM card;
c) Asymmetric algorithm private key and symmetric algorithm key shall not be readable.
5.5.2 Transmission confidentiality
SSL VPN technology, which complies with the requirement in GM/T 0024, should be adopted, so as to guarantee transmission confidentiality between the read-write equipment and the application system.
5.6 Integrity
Cryptography shall be adopted to verify sensitive information in the transmission between the read-write equipment and the application system, so as to find out information being tampered, deleted or interpolated.
5.7 Non-repudiation
Digital signature technology shall be adopted to implement non-repudiation between the read-write equipment and the application system. […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 35789.1-2017General specification for the electronic identification of motor vehicles—Part 1: Automobile
- GM/T 0024SSL VPN specification
- GM/T 0035.1-2014Specifications of cryptographic application for RFID systems. Part 1: Cryptographic protection framework and security levels
- GM/T 0035.5Specifications of cryptographic application for RFID systems. Part 5: Specification for key management
Similar standards
How to Download GB/T 35787-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 35789.1-2017 — General specification for the electronic identification of motor vehicles—Part 1: Automobile
GM/T 0024-2023 — SSL VPN specification
GM/T 0035.1-2014 — Specifications of cryptographic application for RFID systems. Part 1: Cryptographic protection framework and security levels
Secure payment via Stripe
Payments accepted
GB/T 35787-2017
$75.00