Valid

GB/T 35786-2017General specification for read-write equipment of the electronic identification of motor vehicles (English PDF)

机动车电子标识读写设备通用规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (27 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35786-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 35786-2017 is the English-translated version of 机动车电子标识读写设备通用规范.

GB/T 35786-2017 is the Chinese standard "General specification for read-write equipment of the electronic identification of motor vehicles".

Its scope clause reads: This standard specifies the classification and naming, technical requirements, test method, quality assessment procedures and marking, packaging, transportation and storage for read-write equipment of the electronic identification of motor vehicles.

This standard is applicable to the design, production, test and use of read-write equipment of the electronic identification of motor vehicles. Its clauses include terms and definitions; classification and naming.

Found what you need?

Document preview — GB/T 35786-2017

National Standard of the People's Republic of China

ICS: 35.240.15
Classification: T 35

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification and Naming
4.1 Classification
4.2 Naming
5 Technical Requirements
5.1 Design Requirements
5.2 Functional Requirements
5.3 Performance Requirements
5.4 Climatic Environment Adaptability
5.5 Mechanical Environment Adaptability
5.6 Electromagnetic Compatibility
6 Test Method
6.1 Test Conditions
6.2 Test Configuration
6.3 Design Requirements
6.4 Functional Requirements
6.5 Performance Requirements
6.6 Climatic Environment Adaptability
6.7 Mechanical Environment Adaptability
6.8 Electromagnetic Compatibility
7 Quality Evaluation Procedure
7.1 Inspection Classification
7.2 Type Approval Inspection
7.3 Acceptance Inspection
7.4 Routine Inspection
8 Marking, Packaging, Transportation and Storage
8.1 Marking
8.2 Packaging
8.3 Transportation
8.4 Storage
Annex A (Normative) Requirements for Installing Hole of Equipment
Annex B (Normative) Fault Classification and Criteria

1 Scope

This standard specifies the classification and naming, technical requirements, test method, quality assessment procedures and marking, packaging, transportation and storage for read-write equipment of the electronic identification of motor vehicles.

This standard is applicable to the design, production, test and use of read-write equipment of the electronic identification of motor vehicles.

2 Normative References

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.

GB/T 191 Packaging - Pictorial Marking for Handling of Goods

GB/T 2423.1 Environmental Testing - Part 2: Test Methods - Tests A: Cold

GB/T 2423.2 Environmental Testing - Part 2: Test Methods - Tests B: Dry Heat

GB/T 2423.3 Environmental Testing - Part 2: Testing Method - Test Cab: Damp Heat, Steady State

GB/T 2423.5 Environmental Testing for Electric and Electronic Products Part 2: Test Methods Test Ea and Guidance: Shock

GB/T 2423.6 Environmental Testing for Electric and Electronic Products - Part 2: Test Methods - Test Eb and Guidance: Bump

GB/T 2423.8-1995 Environmental Testing for Electric and Electronic Products Part 2: Test Methods Test Ed: Free Fall

GB/T 2423.10 Environmental Testing for Electric and Electronic Products - Part 2: Tests Methods - Test Fc: Vibration (Sinusoidal)

GB/T 2423.17 Environmental Testing for Electric and Electronic Products - Part 2: Test Method - Test Ka: Salt Mist

GB/T 2423.24 Environmental Testing - Part 2: Test Methods - Test Sa: Simulated Solar Radiation at Ground Level and Guidance for Solar Radiation Testing

GB/T 4208-2008 Degrees of Protection Provided by Enclosure (IP Code)

GB/T 4857.5 Packaging - Transport Packages - Vertical Impact Test Method by Dropping

GB/T 4943.1 Information Technology Equipment - Safety - Part 1: General Requirements

GB/T 5080.7 Equipment Reliability Testing Compliance Test Plans for Failure Rate and Mean Time between Failures Assuming Constant Failure Rate

GB/T 5271.14 Information Technology - Vocabulary Part 14: Reliability, Maintainability and Availability

GB/T 9254-2008 Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement

GB/T 11313.16 Radio-frequency Connectors - Part 16: Sectional Specification for RF Coaxial Connectors with Inner Diameter of Outer Conductor 7mm (0.276 in) with Screw Coupling - Characteristics Impedance 50ohm (75ohm) (Type N)

GB/T 15629.3 Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specification

GB/T 15934 Electrical Accessories - Cord Sets and Interconnection Cord Sets

GB/T 16796 Safety Requirements and Test Methods for Security

GB/T 17625.1 Electromagnetic Compatibility - Limits - Limits for Harmonic Current Emissions (Equipment Input Current <=16A per Phase)

GB/T 17626.2-2006 Electromagnetic Compatibility (EMC) - Testing and Measurement Techniques - Electrostatic Discharge Immunity Test

GB/T 17626.3-2016 Electromagnetic Compatibility - Testing and Measurement Techniques - Radiated Radio-frequency Electromagnetic Field Immunity Test

GB/T 17626.4-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Electrical Fast Transient/Burst Immunity Test

GB/T 17626.5-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Surge Immunity Test

GB/T 26125 Electrical and Electronic Products - Determination of Six Regulated Substances (Lead, Mercury, Cadmium, Hexavalent Chromium, Polybrominated Biphenyls, Polybrominated Diphenyl Ethers)

GB/T 26572 Requirements of Concentration Limits for Certain Restricted Substances in Electrical and Electronic Products

GB/T 35787 Security Technical Requirement for the Read-write Equipment of the Electronic Identification of Motor Vehicles

GB/T 35789.1-2017 General Specification for the Electronic Identification of Motor Vehicles - Part 1: Automobile

GB/T 35790.1 Specification for Installation of the Electronic Identification of Motor Vehicles - Part 1: Automobile

ANSI/TIA/EIA 485-A Electrical Characteristics of Generators and Receivers for Use in Balanced Digital Multipoint Systems

3 Terms and Definitions

For the purposes of this document, the terms and definitions given in GB/T 35789.1-2017 and the following apply.

3.1 read-write equipment

electronic device for reading or writing data on electronic identification of motor vehicles based on ultrahigh-frequency radiofrequency identification technology, which is composed of read-write unit, antenna unit, feeder unit etc.

3.1.1 read-write unit

component in read-write equipment for realizing data reading or writing function

3.1.2 antenna unit

component in read-write equipment for radiating the electrical output signal of read-write unit out in the form of electromagnetic wave or converting the electromagnetic wave into electric input signal of read-write unit

3.1.3 feeder unit

cable in read-write equipment for connecting read-write unit and antenna unit

3.2 identifying

process of read-write equipment identifying electronic identification of motor vehicles and establishing communication link with it

3.3 reading

process of read-write equipment reading information from electronic identification of motor vehicles

3.4 writing

process of read-write equipment writing information into electronic identification of motor vehicles

4 Classification and Naming

4.1 Classification

4.1.1 Based on installation mode

Read-write equipment is classified into stationary, handheld and desktop equipment based on installation mode. Stationary read-write equipment is classified into split and integrated read-write equipment.

4.1.2 Based on temperature-resistance grade

Read-write equipment is classified into Classes A, B, C and D based on temperature-resistance grade; where, the applicable environment temperature range for Classes A, B, C and D are -40°C~65°C, -20°C~75°C, -10°C~50°C and -40°C~75°C respectively.

4.1.3 Based on identified object speed

Read-write equipment is classified into low-speed read-write equipment (Category I) and high-speed read-write equipment (Category II) based on the running speed of identified motor vehicles, Category I is the stationary, desktop and handheld read-write equipment for identifying motor vehicle with running speed less than or equal to 80km/h; Category II is the stationary read-write equipment for identifying motor vehicle with running speed less than or equal to 200km/h.

4.1.4 Based on service environment

Read-write equipment is classified into indoor read-write equipment and outdoor read-write equipment based on service environment.

4.2 Naming

4.2.1 Model

The model of read-write equipment shall be composed of installation mode, temperature-resistance grade, identified object speed, applicable environment, enterprise-specified code, etc., and see Figure 1 for the naming rules.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 27 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

GB/T 47347-2026|GB/T 33767.9-2025|GB/T 45228-2025|GB/T 45498.1-2025|GB/T 45498.2-2025|GB/T 45498.3-2025

How to Download GB/T 35786-2017

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.