Valid

GB/T 43330.1-2023Ballast water treatment system—Part 1: Requirements (English PDF)

船舶压载水处理系统第1部分：要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 43330.1-2023 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 27, 2023

Implementation date

June 1, 2024

Scope

GB/T 43330.1-2023 is the English-translated version of 船舶压载水处理系统第1部分：要求.

GB/T 43330.1-2023 is part 1 of the Chinese national standard for ship ballast water treatment systems and carries the requirements, applying to their design, manufacture, installation and inspection.

It covers the classification and the system design limitations, the requirements themselves, the test methods, the installation requirements, the inspection rules and packaging, transport and storage, and it defines ballast water, ballast water treatment and the treatment system, a definition that leaves out the ship's own piping, valves and pumps where no system is fitted.

Its introduction states that ocean-going ships should carry such a system under the IMO ballast water convention, and that GB/T 43330 is planned with a part 1 on requirements, a part 2 on electrolysis and a part 4 on discharge sampling. Issued on 27 November 2023, it has applied since 1 June 2024.

Found what you need?

Document preview — GB/T 43330.1-2023

National Standard of the People's Republic of China

ICS: 47.020.90; 13.060.30
Classification: U 25

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword
Introduction
1 Scope
2 Normative reference documents
3 Terms and definitions

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.

This document is Part 1 of GB/T 43330 "Ship Ballast Water Treatment System". GB/T 43330 has released the following parts.

---Part 1. Requirements.

Introduction

According to the requirements of the International Convention for the Control and Management of Ships' Ballast Water and Sediments issued by the International Maritime Organization (IMO), ocean-going ships A ship's ballast water treatment system should be installed. GB/T 43330 "Ship Ballast Water Treatment System" is planned to be composed of three parts based on the technical characteristics of the product. composition.

---Part 1. Requirements;

---Part 2. Electrolysis;

1 Scope

This document specifies the classification and system design limitations, requirements, test methods, installation requirements, inspection rules, Packaging, transportation and storage.

This document applies to the design, manufacture, installation and inspection of ship ballast water treatment systems (hereinafter referred to as treatment systems).

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document.

GB/T 150.4 Pressure vessels Part 4: Manufacturing, inspection and acceptance

GB/T 191 Packaging, storage and transportation pictorial mark

GB/T 3836.1 Explosive atmosphere Part 1: General requirements for equipment

GB/T 4208-2017 Shell protection level (IP code)

GB/T 10250 Electromagnetic compatibility of ship electrical and electronic equipment

GB/T 13306 Signage

GB/T 13384-2008 General technical conditions for mechanical and electrical product packaging China Classification Society, Type Approval Test Guidelines for Electrical and Electronic Products (2015)

Resolution MEPC 173(58) Guidelines for Ballast Water Sampling, International Maritime Organization (IMO)

Resolution MEPC 300(72) Approval Rules for Ballast Water Management Systems, International Maritime Organization (IMO)

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Ballast water

Water added to a ship for the purpose of controlling the ship's trim, heel, draft, stability or stress.

3.2 Ballast water treatment

Use single or comprehensive mechanical, physical, chemical and biological treatment methods to treat harmful aquatic organisms and organisms in ballast water (3.1) and sediments. Pathogens are removed or disposed of harmlessly.

3.3 ballast water treatment system

Use single or comprehensive mechanical, physical, chemical and biological treatment methods to remove and harmlessly dispose of ballast water (3.1) and sediments Ballast water treatment equipment and control and monitoring equipment for harmful aquatic organisms and pathogens.

Note: Excludes ship ballast water accessories such as piping systems, valves, pumps, etc. when no treatment system is installed.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

GB/T 25016-2026|GB/T 3029-2025|GB/T 43330.2-2024|GB/T 10833-2023|GB/T 12918-2023|GB/T 43330.4-2023

How to Download GB/T 43330.1-2023

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.