GB/T 43302-2023Titanium and titanium alloy wires for additive manufacturing (English PDF)
增材制造用钛及钛合金丝材
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 43302-2023 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 27, 2023
Implementation date
June 1, 2024
Scope
GB/T 43302-2023 is the English-translated version of 增材制造用钛及钛合金丝材.
This document specifies titanium and titanium alloy wires for additive manufacturing: their classification and designation, the technical requirements, the test methods, the inspection rules, the marking, packaging, transport and storage, and the accompanying documents and the content of the order form.
The document applies to the feedstock wire used to make powder and to the printing wire itself, in diameters from 1.0 mm to 7.0 mm.
Found what you need?
Document preview — GB/T 43302-2023
National Standard of the People's Republic of China
- ICS
- 77.150.50
- Classification
- H 64
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative reference documents
- 3 Terms and definitions
- 4 Classification and tagging
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.
1 Scope
This document specifies the classification and labeling, technical requirements, test methods, Inspection rules, markings, packaging, transportation, storage and accompanying documents and order form content.
This document applies to additive manufacturing powder-making filaments and printing filaments with a diameter of 1.0mm~7.0mm.
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document.
GB/T 3620.1 Titanium and titanium alloy grades and chemical compositions
GB/T 3620.2 Allowable deviations in chemical composition of titanium and titanium alloy processed products
GB/T 4698 (all parts) Chemical analysis methods for titanium sponge, titanium and titanium alloys
GB/T 8180 Packaging, marking, transportation and storage of titanium and titanium alloy processed products
GB/T 34647 Titanium and titanium alloy product status codes
GB/T 38982 Testing method for overall dimensions of titanium and titanium alloy processed products
GB/T 39799-2021 Dimensions, shapes, weights and tolerances of titanium and titanium alloy rods and wires
YS/T 1262 Chemical analysis method for titanium sponge, titanium and titanium alloys. Determination of multi-element content by inductively coupled plasma atomic emission. radioactive spectroscopy
YS/T 1465 Terminology and diagram of appearance defects of titanium and titanium alloy processed products
3 Terms and definitions
The terms and definitions defined in GB/T 34647, GB/T 38982 and YS/T 1465 apply to this document.
4 Classification and tagging
4.1 Product brand, status, specifications and category
The grade, status, specification and category of wire material should comply with the provisions of Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 3620.1Designations and chemical compositions of titanium and titanium alloys
- GB/T 3620.2Titanium and titanium alloy permissible variations of chemical composition for wrought product analysis
- GB/T 8180Wrought titanium and titanium alloy products packing，marking，transporting and storing
- GB/T 34647Temper designation system for titanium and titanium alloy
- GB/T 38982Method of measuring shape and dimension for wrought titanium and titanium alloy products
- GB/T 39799-2021Dimension,shape,weight and tolerances for titanium and titanium alloy bars and wires
GB/T 4698
Similar standards
How to Download GB/T 43302-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 34647-2017 — Temper designation system for titanium and titanium alloy
GB/T 3620.1-2016 — Designations and chemical compositions of titanium and titanium alloys
GB/T 3620.2-2023 — Titanium and titanium alloy permissible variations of chemical composition for wrought product analysis
Secure payment via Stripe
Payments accepted
GB/T 43302-2023
$145.00