Valid

GB/T 43176-2023Chlorantraniliprole suspension concentrate (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (11 pages)

Need quotation for your management?

Get a formal quotation for GB/T 43176-2023 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

September 7, 2023

Implementation date

April 1, 2024

Scope

GB/T 43176-2023 (Chlorantraniliprole suspension concentrate) is available as an English-translated PDF.

GB/T 43176-2023 is the Chinese national standard for chlorantraniliprole suspension concentrate. It sets technical requirements, inspection rules, acceptance and quality assurance periods, marking, labelling, packaging, storage and transport, and it describes the test methods for the formulated product.

The technical requirements clause deals with appearance and technical indicators. The standard applies to the quality control of chlorantraniliprole suspension concentrate products.

An appendix lists other names, structural formulas and basic physical and chemical data for chlorantraniliprole, 3-methylpyridine and methanesulfonic acid. Normative references include GB/T 1601, GB/T 1604, GB/T 19136-2021 and GB/T 32776-2016.

Issued on 7 September 2023 and applicable from 1 April 2024, it replaces no earlier edition.

Found what you need?

Document preview — GB/T 43176-2023

National Standard of the People's Republic of China

ICS: 65.100.10
Classification: G 25

Issued by: State Administration for Market Regulation, China National Standardization Administration

Foreword
1 Scope
2 Normative reference documents
3 Terms and definitions
4 Technical requirements

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.

1 Scope

This document specifies the technical requirements, inspection rules, acceptance and quality assurance periods, signs, labels, packaging and Storage and Transportation, describes the test methods for chlorantraniliprole suspensions.

This document applies to the quality control of chlorantraniliprole suspension products.

Note: See Appendix A for other names, structural formulas and basic physical and chemical parameters of chlorantraniliprole, 3-methylpyridine and methanesulfonic acid.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document.

GB/T 1601 Determination of pH value of pesticides

GB/T 1604 Commercial Pesticide Acceptance Rules

GB/T 1605-2001 Sampling methods for commercial pesticides

GB 3796 General principles for pesticide packaging

GB/T 8170-2008 Numerical rounding rules and representation and determination of limit values

GB/T 14825-2006 Method for determination of pesticide suspension rate

GB/T 16150-1995 Method for determination of fineness of pesticide powders and wettable powders

GB/T 19136-2021 Determination method of thermal storage stability of pesticides

GB/T 19137-2003 Method for determination of low-temperature stability of pesticides

GB/T 28137 Determination method of persistent foaming property of pesticides

GB/T 31737 Determination of Pesticide Pourability

GB/T 32776-2016 Pesticide density determination method

3 Terms and definitions

There are no terms or definitions to be defined in this document.

4 Technical requirements

4.1 Appearance

A suspended liquid that is flowable and easy to measure in volume; sedimentation may occur during storage, but should return to its original state when shaken by hand; there should be no agglomeration.

4.2 Technical indicators

Chlorantraniliprole suspension should comply with the requirements of Table 1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 11 pages — is available in the English PDF.

Referenced standards

Normative references

How to Download GB/T 43176-2023

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.