GB/T 42163.1-2022Monomer casting polyamide pulleys—Part 1: Elevator pulleys (English PDF)
单体浇铸聚酰胺滑轮 第1部分：电梯滑轮
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 42163.1-2022 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2022
Implementation date
July 1, 2023
Scope
GB/T 42163.1-2022 is the English-translated version of 单体浇铸聚酰胺滑轮 第1部分：电梯滑轮.
GB/T 42163.1-2022 is the Chinese standard "Monomer casting polyamide pulleys—Part 1: Elevator pulleys". Its scope clause reads: This document specifies the material, structure type and basic parameters, technical requirements, Test methods, inspection rules, marking, packaging, transportation and storage.
This document is applicable to elevator pulleys made of caprolactam as raw material through casting and molding. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 42163.1-2022
National Standard of the People's Republic of China
- ICS
- 83.140.99
- Classification
- G 32
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
1 Scope
This document specifies the material, structure type and basic parameters, technical requirements,
Test methods, inspection rules, marking, packaging, transportation and storage.
This document is applicable to elevator pulleys made of caprolactam as raw material through casting and molding.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 1033.1-2008 Determination of density of plastics and non-cellular plastics - Part 1.Immersion method, liquid pycnometer method and titration method
GB/T 1034-2008 Determination of water absorption of plastics
GB/T 1036 Determination of linear expansion coefficient of plastics at -30°C~30°C Quartz dilatometer method
GB/T 1040.2-2006 Determination of tensile properties of plastics - Part 2.Test conditions for molded and extruded plastics
GB/T 1041-2008 Determination of compression properties of plastics
GB/T 1043.1-2008 Determination of impact properties of plastic charpy beams - Part 1.Non-instrumented impact test
GB/T 1634.2-2019 Determination of deformation temperature of plastics under load - Part 2.Plastics and hard rubber
GB/T 2406.2-2009 Determination of combustion behavior of plastics by oxygen index method - Part 2.Room temperature test
GB/T 2423.34-2012 Environmental testing Part 2.Test method Test Z/AD. Temperature/humidity combined cycle test
GB/T 2423.50-2012 Environmental testing Part 2.Test method Test Cy. Constant damp heat is mainly used for heating components speed test
GB/T 2828.1-2012 Counting sampling inspection procedure Part 1.Batch-by-batch inspection sampling retrieved by acceptance quality limit (AQL) plan
GB/T 2918-2018 Standard environment for conditioning and testing of plastic specimens
GB/T 3398.1-2008 Determination of hardness of plastics - Part 1.Ball indentation method
GB/T 3960 Plastic sliding friction and wear test method
GB/T 9341-2008 Determination of bending properties of plastics
GB/T 13254 caprolactam for industrial use
GB/T 14486-2008 Dimensional tolerances of plastic molded parts
GB/T 16422.2-2022 Plastic laboratory light source exposure test method Part 2.Xenon arc lamp
JB/T 5936-2018 General Technical Conditions for Machined Parts of Construction Machinery
JB/T 5947-2018 General Technical Conditions for Construction Machinery Packaging
3 Terms and Definitions
The following terms and definitions apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1033.1-2008Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
- GB/T 1034-2008Plastics -- Determination of water absorption
- GB/T 1036Test method for coefficient of linear thermal expansion of plastics between 30 Celsius and 30 Celsius with a vitreous silica dilatometer
- GB/T 1040.2-2006Plastics – Determination of Tensile Properties – Part 2: Test Conditions for Moulding and Extrusion Plastics
- GB/T 1041-2008Plastics -- Determination of compressive properties
- GB/T 1043.1-2008Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test
Similar standards
How to Download GB/T 42163.1-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1033.1-2008 — Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
GB/T 1034-2008 — Plastics -- Determination of water absorption
GB/T 1036-2008 — Test method for coefficient of linear thermal expansion of plastics between 30 Celsius and 30 Celsius with a vitreous silica dilatometer
Secure payment via Stripe
Payments accepted
GB/T 42163.1-2022
$150.00