GB/T 41256-2022Interconnection and interoperation specification for equipments of robot manufacturing digital workshop (English PDF)
机器人制造数字化车间装备互联互通和互操作规范
This is a limited preview
Buy now to download the full PDF (25 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41256-2022 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 9, 2022
Implementation date
October 1, 2022
Scope
GB/T 41256-2022 is the English-translated version of 机器人制造数字化车间装备互联互通和互操作规范.
GB/T 41256-2022 sets the interconnection and interoperation specification for the equipment of a robot manufacturing digital workshop.
It gives the composition of the system, the general requirements and then the requirements for interconnection and interoperability: the interfaces between the machines, the robots and the workshop systems, the information they exchange and the way that exchange is organised.
It applies to the interconnection and system integration of the equipment of a robot manufacturing digital workshop. Robot makers, machine builders and system integrators use it. Issued on 9 March 2022, it has applied since 1 October 2022.
Found what you need?
Document preview — GB/T 41256-2022
National Standard of the People's Republic of China
- ICS
- 25.040.01
- Classification
- N 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Robotic Manufacturing Digital Workshop System Composition
- 5 General Requirements
- 6 Interconnection and interoperability requirements
- 6.1 Interconnection Network System
- 6.2 Interactive Data of Robotic Manufacturing Digital Workshop
- Reference
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.
1 Scope
This document specifies the system composition, general requirements and interconnection and interoperability requirements of the robot manufacturing digital workshop.
This document is applicable to guide the interconnection and system integration of robot manufacturing digital workshop equipment.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.
GB/T 37393-2019 General technical requirements for digital workshops
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Robot
A machine with two or more programmable axes, and some degree of autonomy, that can move within its environment to perform a predetermined task executive body. [Source: GB/T 36530-2018, 3.2]
3.2 Manufacturing
The function or act of converting a raw material or semi-finished product into a semi-finished or finished product. [Source: GB/T 20719.11-2010, 3.1.14]
3.3 digital workshop digitalfactory; digitalworkshop
Based on the technology and equipment required by the production object, using information technology, automation, measurement and control technology, etc. as means to connect the workshop with data Different units are the implementation units for planning, managing, diagnosing and optimizing the production operation process.
Note: In this document, the digital workshop only includes the production planning, production process, and production execution stages, excluding the stages of product design, service and support. [Source: GB/T 37413-2019, 2.1]
3.4 Manufacturing execution system
A production activity management system that initiates, directs, responds and reports to production managers on-line, real-time production activity. This system assists in the execution of manufacturing order activities. [Source: GB/T 25486-2010, 2.162, with modifications]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 25 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 41256-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 37393-2019 — Digital factory—General technical requirements
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 41256-2022
$420.00