GB/T 39583-2020Requirement of intelligent technology for energy-saving retrofit of existing building (English PDF)
既有建筑节能改造智能化技术要求
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39583-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 14, 2020
Implementation date
July 1, 2021
Scope
GB/T 39583-2020 is the English-translated version of 既有建筑节能改造智能化技术要求.
GB/T 39583-2020 is the Chinese standard "Requirement of intelligent technology for energy-saving retrofit of existing building".
Its scope clause reads: This standard specifies the application status diagnosis, intelligent technical requirements and intelligence of the energy saving and intelligent system involved in the energy-saving renovation of existing buildings: Energy and chemical system operation safety and maintenance requirements: This standard applies to the application of intelligent technology for energy-saving renovation projects in existing buildings, and can be used as a choice and application for energy-saving renovation of existing buildings The technical basis of the intelligent system:.
Found what you need?
Document preview — GB/T 39583-2020
National Standard of the People's Republic of China
- ICS
- 91.040.01
- Classification
- P 36
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope1
- 2 Normative references1
- 3 Terms and definitions2
- 4 General requirements2
- 5 Existing building energy saving and intelligent system application status diagnosis3
- 6 Technical requirements for intelligent measures for energy-saving renovation of existing buildings6
- Appendix A (normative appendix) Existing building energy saving and intelligent system diagnosis details13
- Appendix B (Normative Appendix) Intelligent System Monitoring Function Details14
1 Scope
This standard specifies the application status diagnosis, intelligent technical requirements and intelligence of the energy saving and intelligent system involved in the energy-saving renovation of existing buildings:
Energy and chemical system operation safety and maintenance requirements:
This standard applies to the application of intelligent technology for energy-saving renovation projects in existing buildings, and can be used as a choice and application for energy-saving renovation of existing buildings
The technical basis of the intelligent system:
2 Normative references
The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article
Pieces: For undated references, the latest version (including all amendments) applies to this document:
GB/T 5700 Illumination measurement method
GB/T 10058 Technical requirements for elevators
GB/T 14549 Power quality public grid harmonics
GB/T 15543 Power quality three-phase voltage unbalance
GB 17167 General rules for the provision and management of energy measuring instruments for energy-consuming units
GB 19577 Water chiller energy efficiency limit value and energy efficiency grade
GB 19762 Clear water centrifugal pump energy efficiency limit value and energy saving evaluation value
GB/T 19939 Technical requirements for grid connection of photovoltaic systems
GB/T 20299:1 Application of Digital Technology in Buildings and Residential Areas Part 1: General System Requirements
GB/T 20299:2 Application of Digital Technology in Buildings and Residential Areas Part 2: Inspection and Acceptance
GB/T 20900 Elevators, escalators and moving walks risk assessment and reduction methods
GB 21455 Speed controllable room air conditioner energy efficiency limit value and energy efficiency grade
GB/T 22240 Information Security Technology Network Security Level Protection Rating Guidelines
GB/T 24476 Technical specifications for the Internet of Things for elevators, escalators and moving walks
GB/T 24804 Specification for improving the safety of elevators in use
GB/T 30559:2 Energy performance of elevators, escalators and moving walks Part 2: Energy calculation and classification of elevators
GB 50015 Building Water Supply and Drainage Design Standard
GB 50034 Architectural Lighting Design Standard
GB 50052 Code for Design of Power Supply and Distribution System
GB 50093 Automation Instrumentation Engineering Construction and Quality Acceptance Specification
GB 50189 Energy-saving design standard for public buildings
GB 50242 Code for acceptance of construction quality of building water supply and drainage and heating engineering
GB 50243 Code for acceptance of construction quality of ventilation and air conditioning engineering
GB 50282 Urban Water Supply Project Planning Code
GB 50303 Construction Quality Acceptance Code for Building Electrical Engineering
GB 50314 Intelligent Building Design Standard […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39583-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 39583-2020
$300.00