GB/T 39528-2020Test method for determining the seismic drift causing the panels fallout from curtain wall system (English PDF)
建筑幕墙面板抗地震脱落检测方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39528-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 14, 2020
Implementation date
November 1, 2021
Scope
GB/T 39528-2020 is the English-translated version of 建筑幕墙面板抗地震脱落检测方法.
GB/T 39528-2020 is the Chinese standard "Test method for determining the seismic drift causing the panels fallout from curtain wall system".
Its scope clause reads: This standard specifies the testing principles, testing devices, test pieces, pre-test preparations, testing, and testing results for the anti-seismic shedding of building curtain wall panels And test report: This standard is applicable to laboratory testing for earthquake resistance of building curtain wall panels:.
Its clauses include terms and definitions; detection principle; detection device.
Found what you need?
Document preview — GB/T 39528-2020
National Standard of the People's Republic of China
- ICS
- 91.060.10
- Classification
- P 32
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Detection principle
- 5 Detection device
- 6 Specimen
- 7 Preparation before testing
- 8 Test
- 9 Test results
- 10 Test report
- Appendix A (informative appendix) The scope of application of glass curtain wall test results
1 Scope
This standard specifies the testing principles, testing devices, test pieces, pre-test preparations, testing, and testing results for the anti-seismic shedding of building curtain wall panels
And test report:
This standard is applicable to laboratory testing for earthquake resistance of building curtain wall panels:
2 Normative references
The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article
Pieces: For undated references, the latest version (including all amendments) applies to this document:
GB/T 18250 Classification and detection method of interlayer deformation performance of building curtain wall
GB/T 34327 Terminology for building curtain walls
3 Terms and definitions
The following terms and definitions defined in GB/T 34327 and GB/T 18250 apply to this document:
3:1
Fall off falout
The phenomenon that the building curtain wall panel or accessories separate and fall from the test piece:
Note: Accessories refer to the pressure plate, buckle cover, fasteners, etc: of the fixed panel:
3:2
Damage displacement
The minimum displacement of the panel or accessories of the building curtain wall specimen that has visible damage that affects normal use but does not fall off:
Note 1: Visible damage includes panel cracks, bonding damage, pressure plate and fastener damage, etc:
Note 2: The damage displacement is represented by the symbol deltac:
3:3
Falout displacement
The minimum displacement of the building curtain wall specimen panel or accessories falling off:
Note: The falling displacement is represented by the symbol deltaf:
4 Detection principle
The dynamic loading device is used to simulate the inter-layer deformation of the main structure caused by the seismic load: Under the specified frequency and displacement conditions, check
Test the resistance of the panel and accessories of the curtain wall to damage and fall off:
5 Detection device
5:1 Composition
The testing device should consist of a test piece mounting frame (including support frame, fixed beam, movable beam, sliding device, etc:), dynamic loading device, displacement measurement […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39528-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 39528-2020
$150.00