Valid

GB/T 39506-2020Determination of the poly vinyl chloride (PVC) content of unplasticized poly vinyl chloride (PVC-U) pipes and fittings - Method based on total chlorine content (English PDF)

硬聚氯乙烯(PVC-U)管材及管件中聚氯乙烯(PVC)含量的测定 基于总氯含量的方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39506-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 19, 2020

Implementation date

June 1, 2021

Scope

GB/T 39506-2020 is the English-translated version of 硬聚氯乙烯(PVC-U)管材及管件中聚氯乙烯(PVC)含量的测定 基于总氯含量的方法.

GB/T 39506-2020 is the Chinese standard "Determination of the poly vinyl chloride (PVC) content of unplasticized poly vinyl chloride (PVC-U) pipes and fittings - Method based on total chlorine content".

Its scope clause reads: This standard specifies the method for determining the content of polyvinyl chloride (PVC) in unplasticized polyvinyl chloride (PVC-U) pipes and fittings based on the total chlorine content.

This standard applies to hard PVC pipes and fittings. Note. For pipes and fittings containing other chlorine-containing components such as chlorinated polyvinyl chloride (PVC-C) or chlorinated polyethylene (CPE), the polyvinyl chloride measured by this method contains The amount may deviate from the actual value. Its clauses include principle; reagents and materials; equipment.

Found what you need?

Document preview — GB/T 39506-2020

National Standard of the People's Republic of China

ICS
83.140.30
Classification
G 33

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Principle
  • 4 Reagents and materials
  • 5 Equipment

1 Scope

This standard specifies the method for determining the content of polyvinyl chloride (PVC) in unplasticized polyvinyl chloride (PVC-U) pipes and fittings based on the total chlorine content.

This standard applies to hard PVC pipes and fittings.

Note. For pipes and fittings containing other chlorine-containing components such as chlorinated polyvinyl chloride (PVC-C) or chlorinated polyethylene (CPE), the polyvinyl chloride measured by this method contains

The amount may deviate from the actual value.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 601-2016 Preparation of chemical reagent standard titration solution

GB/T 9345.5-2010 Determination of ash content of plastics Part 5.Polyvinyl chloride

3 Principle

The sample is fully combusted in oxygen, and after the hydrogen chloride, the decomposition product of polyvinyl chloride, neutralizes with the lye, the chlorine is determined by potentiometric titration.

content. Simultaneously determine the ash content of the sample. Calculate the polyvinyl chloride content in the sample based on the total chlorine content and ash content.

4 Reagents and materials

Unless otherwise specified, only use reagents and distilled or deionized water or equivalent purity water confirmed to be analytically pure in the analysis.

4.1

Nitric acid solution, c(HNO3)=2mol/L.

4.2

Silver nitrate standard titration solution, c(AgNO3)=0.1mol/L.

The preparation and calibration of silver nitrate standard titration solution shall be prepared and calibrated according to 4.21 of GB/T 601-2016.

4.3

Sodium nitrate.

4.4

Potassium hydroxide solution, 10g/L.

4.5

Hydrogen peroxide solution, 300g/L.

4.6

Sulfuric acid, rho=1.84g/mL.

4.7

Acetic acid, purity >=99.5%.

4.8

Oxygen.

5 Equipment

5.1

Plastic crusher, the output particle size is 1mm~3mm.

5.2

Potentiometric titrator, equipped with silver electrode and calomel electrode.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 39506-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 39506-2020

$105.00