GB/T 39463-2020Electrical equipment and system of industrial robot—General requirements (English PDF)
工业机器人电气设备及系统 通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39463-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 19, 2020
Implementation date
June 1, 2021
Scope
GB/T 39463-2020 is the English-translated version of 工业机器人电气设备及系统 通用技术条件.
GB/T 39463-2020 is the Chinese standard "Electrical equipment and system of industrial robot—General requirements".
Its scope clause reads: This standard specifies the environmental conditions, design and manufacturing, electromagnetic compatibility, and electrical technical documents of the electrical equipment and systems of industrial robots And test conditions and inspection rules.
This standard applies to the electrical equipment, electronic equipment and programmable electronic equipment and systems of industrial robots (hereinafter referred to as "electrical equipment And systems").
The electrical equipment and systems of industrial robot systems/units can refer to this standard. Note.
The electrical equipment and systems of industrial robots referred to in this standard generally include control equipment (control device/controller), drive device (driver/drive unit) Yuan and servo motor), teaching box, communication interface, sensor and electric cabinet, etc. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 39463-2020
National Standard of the People's Republic of China
- ICS
- 29.020
- Classification
- J 09
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope1
- 2 Normative references1
- 3 Terms and definitions1
- 4 Environmental conditions2
- 4.1 Working power supply conditions2
- 4.2 Climate and environmental conditions3
- 4.3 Mechanical environmental conditions5
- 5 Design and manufacturing5
- 5.1 Structure and appearance5
- 5.2 Identification6
- 5.3 Color6
- 5.4 Enclosure protection7
- 5.5 Protection against electric shock7
- 5.6 Protective connection (protective grounding)8
- 5.7 Functional ground8
- 5.8 Cable selection and connection8
- 5.9 Insulation resistance8
- 5.10 Withstand voltage9
- 5.11 Flame resistance9
- 5.12 Convenience9
- 5.13 Quality of components9
- 6 Electromagnetic compatibility10
- 6.1 Electromagnetic compatibility---emission10
- 6.2 Electromagnetic compatibility---Immunity10
- 7 Electrical technical documents11
- 7.1 Overview11
- 7.2 Documents and content11
- 7.3 Inspection12
- 8 Test conditions and inspection rules12
- 8.1 Test conditions12
- 8.2 Inspection rules12
1 Scope
This standard specifies the environmental conditions, design and manufacturing, electromagnetic compatibility, and electrical technical documents of the electrical equipment and systems of industrial robots
And test conditions and inspection rules.
This standard applies to the electrical equipment, electronic equipment and programmable electronic equipment and systems of industrial robots (hereinafter referred to as "electrical equipment
And systems"). The electrical equipment and systems of industrial robot systems/units can refer to this standard.
Note. The electrical equipment and systems of industrial robots referred to in this standard generally include control equipment (control device/controller), drive device (driver/drive unit)
Yuan and servo motor), teaching box, communication interface, sensor and electric cabinet, etc.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document.
For undated references, the latest version (including all amendments) applies to this document.
GB/T 2423.1-2008 Environmental testing of electric and electronic products Part 2.Test method Test A. Low temperature
GB/T 2423.2-2008 Environmental testing of electric and electronic products Part 2.Test method Test B. High temperature
GB/T 4205-2010 Basic and safety rules for human-machine interface signs and operating rules
GB/T 4208-2017 Enclosure protection grade (IP code)
GB/T 5169.11-2017 Fire hazard test for electrical and electronic products Part 11.Glow wire/hot wire basic test method Glow wire flammability test method for finished products (GWEPT)
GB/T 5169.16-2017 Fire hazard test of electric and electronic products Part 16.Test flame 50W horizontal and vertical flame test method
GB/T 5226.1-2019 Electrical safety of machinery Electrical equipment of machinery Part 1.General technical conditions
GB/T 12643-2013 Robots and Robot Equipment Vocabulary
GB/T 16977-2019 Robot and robot equipment coordinate system and motion naming principles
GB/T 19678.1-2018 Compilation composition, content and presentation method of instructions for use Part 1.General rules and detailed requirements
GB/T 24340-2009 Graphical symbols for electrical diagrams of industrial machinery
GB/T 24341-2009 Drawing, diagrams and tables of electrical equipment for industrial machinery
GB/T 29482.1-2013 Industrial Machinery Digital Control System Part 1.General Technical Conditions
Graphical symbols for ISO 7000 equipment registration symbols
3 Terms and definitions
The following terms and definitions defined in GB/T 5226.1-2019 and GB/T 12643-2013 apply to this document. In order to make
Use, the following repeatedly lists some terms and definitions of GB/T 5226.1-2019 and GB/T 12643-2013.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39463-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 39463-2020
$240.00