GB/T 39341-2020General specification for high speed transmission connectors for aerospace (English PDF)
宇航用高速传输连接器通用规范
This is a limited preview
Buy now to download the full PDF (30 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39341-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 19, 2020
Implementation date
June 1, 2021
Scope
GB/T 39341-2020 is the English-translated version of 宇航用高速传输连接器通用规范.
GB/T 39341-2020 is the Chinese standard "General specification for high speed transmission connectors for aerospace". Its scope clause reads: This standard specifies general technical requirements, quality assurance regulations, delivery preparations and instructions for high-speed transmission connectors for aerospace.
This standard applies to high-speed transmission connectors for aerospace (hereinafter referred to as connectors), and its contact type is differential contact. Its clauses include requirements.
Found what you need?
Document preview — GB/T 39341-2020
National Standard of the People's Republic of China
- ICS
- 31.220.10
- Classification
- V 25
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Requirements
- 3.1 General
- 3.2 Material
- 3.3 Design, structure and dimensions
- 3.4 Auxiliary parts
- 3.5 Performance
- 3.6 Destructive Physical Analysis (DPA)
- 3.7 Sign
- 3.8 Appearance quality
- 4 Quality assurance regulations
- 4.1 General
- 4.2 Inspection classification
- 4.3 Identification inspection
- 4.4 Quality consistency inspection
- 4.5 Inspection method
- 5 Delivery preparation
- 5.1 Packaging
- 5.2 Transportation and storage
- 5.3 Identification
- 6 Explanation
- 6.1 Intended use
- 6.2 Order documents
- 6.3 Certificate of conformity
- 6.4 Environmental protection materials
- Appendix A (informative appendix) Maximum transmission rate and reference frequency of the connector
- Appendix B (Informative Appendix) Destructive Physical Analysis (DPA)
1 Scope
This standard specifies general technical requirements, quality assurance regulations, delivery preparations and instructions for high-speed transmission connectors for aerospace.
This standard applies to high-speed transmission connectors for aerospace (hereinafter referred to as connectors), and its contact type is differential contact.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document.
For undated references, the latest version (including all amendments) applies to this document.
GB/T 2421.1-2008 Overview and Guidelines for Environmental Testing of Electrical and Electronic Products
GB/T 2423.1-2008 Environmental testing of electric and electronic products Part 2.Test method Test A. Low temperature
GB/T 2423.2-2008 Environmental testing of electric and electronic products Part 2.Test method Test B. High temperature
GB/T 2423.4-2008 Environmental testing of electric and electronic products Part 2.Test method Test Db. Alternating damp heat (12h 12h cycle)
GB/T 2423.5-2019 Environmental Test Part 2.Test Method Test Ea and Guideline. Impact
GB/T 2423.10-2019 Environmental Test Part 2.Test Method Test Fc. Vibration (Sine)
GB/T 2423.16-2008 Environmental testing of electric and electronic products Part 2.Test method Test J and guideline. Mould
GB/T 2423.17-2008 Environmental testing of electric and electronic products Part 2.Test method Test Ka. Salt spray
GB/T 2423.22-2012 Environmental Test Part 2.Test Method Test N. Temperature Change
GB/T 2423.28-2005 Environmental testing of electrical and electronic products Part 2.Test methods Test T. Soldering
GB/T 2423.56-2018 Environmental Test Part 2.Test Method Test Fh. Broadband Random Vibration and Guidelines
GB/T 5095.2-1997 Basic test procedures and measurement methods for electromechanical components for electronic equipment Part 2.General inspection, electrical
Continuity and contact resistance test, insulation test and voltage stress test
GB/T 5095.5-1997 Basic test procedures and measurement methods for electromechanical components for electronic equipment Part 5.Impact test (free components),
Static load test (fixed components), life test and overload test
GB/T 5095.7-1997 Basic test procedures and measurement methods for electromechanical components for electronic equipment Part 7.Mechanical operation test and leaktightness test
GB/T 5095.8-1997 Basic test procedures and measurement methods for electromechanical components for electronic equipment Part 8.Mechanical tests on connectors, contacts and terminals
SJ/T 11104-2016 Gold plating specification
QJ1903-1990 General Specification for Electrical Connectors
QJ1558A-2012 Material Volatility Test Method Under Vacuum Conditions
3 requirements
3.1 General
The connector shall meet all requirements specified in this standard and related detailed specifications.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39341-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 39341-2020
$455.00