GB/T 39340-2020Aerospace electronic time deterministic network protocol (English PDF)
宇航电子时间确定性网络协议
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39340-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 19, 2020
Implementation date
June 1, 2021
Scope
GB/T 39340-2020 is the English-translated version of 宇航电子时间确定性网络协议.
GB/T 39340-2020 is the Chinese standard "Aerospace electronic time deterministic network protocol".
Its scope clause reads: This standard specifies the network architecture, end system requirements, switch requirements, physical layer requirements, and time synchronization requirements for aerospace time deterministic networks: Summing and real-time audio and video transmission and other requirements: This standard is applicable to strong implementations with end-to-end delay not greater than 100us, jitter not greater than 10us, and network synchronization accuracy not greater than:200ns Time and high certainty internal backbone network of aerospace integrated electronic system:. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 39340-2020
National Standard of the People's Republic of China
- ICS
- 49.035
- Classification
- V 25
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Abbreviations
- 5 General requirements
- 5:1 Architecture requirements
- 5:2 Network composition
- 5:3 Transmission service type requirements
- 5:4 Data frame format requirements
- 6 Detailed requirements for end system
- 6:1 Overview of End System
- 6:2 Traffic regulation and scheduling requirements
- 6:3 Integrity check and redundancy management
- 6:4 Integrated Electronic Services
- 6:5 Performance indicators
- 7 Switch requirements
- 7:1 Basic concepts
- 7:2 Filtering and control functions
- 7:3 Exchange function
- 7:4 Switch terminal function
- 7:5 Monitoring function
- 7:6 Configuration file
- 7:7 Operation Mode
- 7:8 Data Loading
- 7:9 Pin programming
- 7:10 Performance characteristics
- 7:11 Performance Index
- 8 Physical layer requirements
- 9 Time synchronization requirements
- 9:1 Synchronization method
- 9:2 Synchronization establishment conditions
- 10 Real-time audio and video transmission
1 Scope
This standard specifies the network architecture, end system requirements, switch requirements, physical layer requirements, and time synchronization requirements for aerospace time deterministic networks:
Summing and real-time audio and video transmission and other requirements:
This standard is applicable to strong implementations with end-to-end delay not greater than 100us, jitter not greater than 10us, and network synchronization accuracy not greater than:200ns
Time and high certainty internal backbone network of aerospace integrated electronic system:
2 Normative references
The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article
Pieces: For undated references, the latest version (including all amendments) applies to this document:
ARINC615A Avionics Ethernet interface software data loader (Softwaredataloaderusingethernetin- terfaces)
ARINC653 Avionics application software standard interface (Avionicsapplicationsoftwarestandardinterface)
ARINC664P2 Aeronautical Data Network Part 2: Ethernet Physical Layer and Data Link Layer Protocol (Aircraftdatanet- work-Part 2:Etherentphysicalanddatalinklayerspceification)
ARINC664P7 Aeronautical Data Network Part 7: Avionics Ethernet Protocol (Aircraftdatanetwork-Part 7:
Avionicsfulduplexswitchedethernet (AFDX) network)
ARINC665 Avionics Loadable Software Standards (Loadablesoftwarestandards)
IEEE802:3 Ethernet standard (IEEEstandardforethernet)
3 Terms and definitions
The following terms and definitions apply to this document:
3:1
Timedeterministicnetwork
A high-speed network with strong real-time and high determinism based on Ethernet, which can realize the convergent transmission of different types of data on the same network:
3:2
Endsystem
The time-deterministic network component provides an application interface for the connection between the aerospace electronics subsystem and the TDN network, and is responsible for collecting the front-end
After the data is encapsulated by the network protocol, the frame formed is sent to the TDN network:
3:3
Switch
Time-deterministic network components, realize the fusion and exchange of network data and control information, and undertake certain synchronization during the network synchronization process:
Step role:
3:4
Networkloading
Download the device configuration file to the network switch and end system to make the entire network operate normally according to the configuration:
Note: Network loading is referred to as loading in this standard:
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39340-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 39340-2020
$360.00