Valid

GB/T 39286-2020Absorption heat exchanger (English PDF)

吸收式换热器

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39286-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 19, 2020

Implementation date

October 1, 2021

Scope

GB/T 39286-2020 is the English-translated version of 吸收式换热器.

GB/T 39286-2020 is the Chinese standard "Absorption heat exchanger". Its scope clause reads: This standard specifies the classification and marking of absorption heat exchangers, general requirements, requirements, test methods, inspection rules, marking, packaging, and transportation And storage.

This standard is applicable to the highest working temperature not exceeding 150°C and the highest working pressure not exceeding 2.5MPa, applied to low-grade waste heat recovery Or water-water absorption heat exchangers in areas such as central heating. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 39286-2020

National Standard of the People's Republic of China

ICS
91.140.10
Classification
P 46

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Classification and marking
  • 5 General requirements
  • 6 Requirements
  • 7 Test method
  • 8 Inspection rules
  • 9 Marking, packaging, transportation and storage
  • Appendix A (Normative Appendix) Thermal Performance Test
  • Appendix B (Normative Appendix) Noise Test Method

1 Scope

This standard specifies the classification and marking of absorption heat exchangers, general requirements, requirements, test methods, inspection rules, marking, packaging, and transportation

And storage.

This standard is applicable to the highest working temperature not exceeding 150°C and the highest working pressure not exceeding 2.5MPa, applied to low-grade waste heat recovery

Or water-water absorption heat exchangers in areas such as central heating.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 3785.1 Electroacoustic Sound Level Meter Part 1.Specification

GB/T 9068 Engineering method for the determination of noise sound power level of heating, ventilation and air conditioning equipment

GB/T 16803 Terminology for heating, ventilation, air conditioning and purification equipment

GB 18361 Safety requirements for lithium bromide absorption cold (warm) water units

GB/T 18431 Steam and hot water type lithium bromide absorption chiller

GB/T 27698.1 Performance test methods for heat exchangers and heat transfer elements Part 1.General requirements

CJJ34 Code for design of urban heating pipe network

CJJ/T 55 Standard for Heating Terminology

JB/T 4330 Determination of noise from refrigeration and air-conditioning equipment

NB/T 47004.1 Plate Heat Exchanger Part 1.Removable Plate Heat Exchanger

3 Terms and definitions

The following terms and definitions defined in GB/T 16803 and CJJ/T 55 apply to this document.

3.1 Absorption heat exchanger

A heat exchange device integrated with a hot water absorption heat pump and a conventional heat exchanger.

Note. It is suitable for situations where there is a large difference in flow between the heat source and the heat sink, especially when the mass flow ratio is greater than 3.

3.2 The first type of absorption heat exchanger

The heat can be transferred from a heat source with a small flow to a heat sink with a large flow, and the outlet temperature of the heat source is lower than the inlet temperature of the heat sink.

Absorption heat exchanger.

3.3 The second type of absorption heat exchanger

The heat can be transferred from the heat source with large flow to the heat sink with small flow, and the outlet temperature of the heat sink is higher than the inlet temperature of the heat source.

Absorption heat exchanger.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 39286-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 39286-2020

$240.00