GB/T 39186-2020Calculation methods of water saved by projects for iron and steel industry (English PDF)
钢铁行业项目节水量计算方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39186-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 11, 2020
Implementation date
May 1, 2021
Scope
GB/T 39186-2020 is the English-translated version of 钢铁行业项目节水量计算方法.
GB/T 39186-2020 is the Chinese standard "Calculation methods of water saved by projects for iron and steel industry". Its scope clause reads: This standard specifies the terms and definitions, calculation methods, and calculation method descriptions for the calculation of water savings for projects in the steel industry.
This standard is applicable to the calculation of water saving amount of water saving projects in the steel industry. Refer to the calculation of water saving for new projects and management projects use. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 39186-2020
National Standard of the People's Republic of China
- ICS
- 13.020.20
- Classification
- Z 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Projectboundary
- 3.2 Project water saving
- 3.3 Base period
- 3.4 Statistical reporting period
- 3.5 Calibration water withdrawal
1 Scope
This standard specifies the terms and definitions, calculation methods, and calculation method descriptions for the calculation of water savings for projects in the steel industry.
This standard is applicable to the calculation of water saving amount of water saving projects in the steel industry. Refer to the calculation of water saving for new projects and management projects use.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 7119 Evaluation Guidelines for Water-saving Enterprises
GB/T 12452 General Rules of Water Balance Test for Enterprises
GB/T 18916.2 Water withdrawal quota Part 2.Iron and steel complex
GB/T 21534 Industrial water saving terms
GB/T 26719 General Rules for Enterprise Water Use Statistics
GB/T 34148 Project water saving calculation guide
CJJ92 Leakage control and assessment standard of urban water supply pipe network
3 Terms and definitions
Defined by GB/T 7119, GB/T 12452, GB/T 18916.2, GB/T 21534, GB/T 26719, GB/T 34148 and CJJ92
And the following terms and definitions apply to this document.
3.1 Projectboundary
The scope and geographic boundaries of water-using units, equipment, and systems involved in the implementation of water-saving renovation projects by iron and steel enterprises.
3.2 Project water saving
Under the conditions of meeting the same needs or achieving the same purpose, through the implementation of the project, the water intake of the water use unit is reduced compared with the reduction of the unimplemented project
A small amount.
3.3 Base period
A certain period of time before the implementation of water-saving measures used to compare and determine the amount of water-saving.
3.4 Statistical reporting period
A certain period of time after the implementation of water-saving measures used to compare and determine the amount of water-saving.
3.5 Calibration water withdrawal
Utilize the amount of water taken by the water use unit (enterprise), system, and equipment within the project boundary before the implementation of the project, after calibration according to the conditions of the statistical reporting period […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39186-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 39186-2020
$210.00