GB/T 38968-2020Guidelines for circular economy practical technologies in copper smelting industry (English PDF)
铜冶炼行业循环经济实践技术指南
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38968-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 21, 2020
Implementation date
February 1, 2021
Scope
GB/T 38968-2020 is the English-translated version of 铜冶炼行业循环经济实践技术指南.
GB/T 38968-2020 is the Chinese standard "Guidelines for circular economy practical technologies in copper smelting industry".
Its scope clause reads: This standard specifies the basic principles for the development of circular economy in the copper smelting industry, the circular industry chain, the types of recyclable resources, and the recycling Ways and practical techniques of circular economy.
This standard applies to the circular economy practice of copper smelting enterprises that use copper concentrate, blister copper, and waste copper as raw materials.
This standard does not apply to the circular economy practice of copper smelting enterprises that adopt the direct heap leaching process of copper-containing ore.
Its clauses include terms and definitions; basic principles; circular industry chain.
Found what you need?
Document preview — GB/T 38968-2020
National Standard of the People's Republic of China
- ICS
- 13.020.20
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 basic principles
- 5 Circular industry chain
1 Scope
This standard specifies the basic principles for the development of circular economy in the copper smelting industry, the circular industry chain, the types of recyclable resources, and the recycling
Ways and practical techniques of circular economy.
This standard applies to the circular economy practice of copper smelting enterprises that use copper concentrate, blister copper, and waste copper as raw materials.
This standard does not apply to the circular economy practice of copper smelting enterprises that adopt the direct heap leaching process of copper-containing ore.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 7119 Evaluation Guidelines for Water-saving Enterprises
GB/T 18916.18 Water intake quota Part 18.Copper smelting production
GB/T 34152 General Rules of Circular Economy Management for Industrial Enterprises
3 Terms and definitions
The terms and definitions defined in GB/T 34152 apply to this document.
4 basic principles
4.1
The principles of reduction, resource utilization and reuse shall be followed, and the consumption of raw and auxiliary materials, as well as coal, natural gas and electric energy shall be reduced through technical integration.
Improve the resource utilization level of waste heat and energy of flue gas and solid waste and by-products such as tailings, soot, anode sludge, etc., and realize the internal resources and energy of the industry.
Maximize source utilization efficiency.
4.2
It should cover the main processes of smelting, blowing, fire refining, electrolytic refining and other major processes of resources, efficient use of energy and recycling of renewable resources, etc.
The main link of circular economy.
5 Circular industry chain
The schematic diagram of the circular economy industrial chain of the copper smelting industry is shown in Figure 1.Among them, the main processes such as smelting, blowing, fire refining, and electrolytic refining are constituted
The main part of the circular economy industry chain, sulphuric acid production from flue gas, waste heat and waste energy utilization, waste water reuse, solid waste and by-product comprehensive utilization constitute a cycle
The extended part of the economic industry chain.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38968-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38968-2020
$150.00