GB/T 38677-2020Gas analysis—Measurement procedure and result—Technical requirements for calibration (English PDF)
气体分析 测量过程及结果 校准技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38677-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 31, 2020
Implementation date
February 1, 2021
Scope
GB/T 38677-2020 is the English-translated version of 气体分析 测量过程及结果 校准技术要求.
GB/T 38677-2020 is the Chinese standard "Gas analysis—Measurement procedure and result—Technical requirements for calibration".
Its scope clause reads: This standard specifies the calibration technical requirements related to the measurement process and results of gas component content, including the measurement standard and the measurement standard Gas, gas transmission system, comparison method calibration, traceability requirements of measurement equipment and uncertainty of measurement results.
This standard applies to the measurement of the content of gas components using the comparative method. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 38677-2020
National Standard of the People's Republic of China
- ICS
- 71.100.20
- Classification
- G 86
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Calibration
1 Scope
This standard specifies the calibration technical requirements related to the measurement process and results of gas component content, including the measurement standard and the measurement standard
Gas, gas transmission system, comparison method calibration, traceability requirements of measurement equipment and uncertainty of measurement results.
This standard applies to the measurement of the content of gas components using the comparative method.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.
GB/T 10628 Gas analysis and calibration method for determination and verification of gas mixture
GB/T 14850 gas analysis vocabulary
GB/T 27418 Evaluation and expression of measurement uncertainty
GB/T 33360 Guidelines for Gas Purification Technology for Trace Analysis in Gas Analysis
GB/T 37180-2018 Guide for the use of pure gas and mixed gas for gas analysis and calibration
GB/T 38527-2020 General rules for calibrated mixed gas technology
ISO 6145-6..2017 Preparation of mixed gas for calibration by gas analysis dynamic method. Part 6. Critical flow orifice (Gas analysis-Preparationofcalibrationgasmixturesusingdynamicmethods-Part 6. Criticalflowori- fices)
ISO 12963..2017 gas analysis is based on a single-point and two-point calibration method for gas mixture composition (Gasanal- ysis-Comparisonmethodsforthedeterminationofthecompositionofgasmixturesbasedonone-and two-pointcalibration)
ISO 14167..2018 General quality requirements and measurement traceability of gas analysis and calibration mixtures (Gasanalysis-
Generalqualityaspectsandmetrologicaltraceabilityofcalibrationgasmixtures)
3 Terms and definitions
The terms and definitions defined in GB/T 14850 and the following apply to this document.
3.1 Calibration
For a set of operations under specified conditions, the first step is to determine the relationship between the quantity provided by the measurement standard and the corresponding indication,
This information is used to determine the relationship between the measurement results obtained from the indicated values.
Degree.
Note. Calibration can be expressed in the form of text description, calibration function, calibration chart, calibration curve or calibration table.In some cases, the
Correction value or correction factor of measurement uncertainty.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38677-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38677-2020
$115.00