Valid

GB/T 38657-2020Specifications for low pressure feed water heater for conventional island in nuclear power station (English PDF)

核电厂常规岛低压加热器技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (27 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38657-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 31, 2020

Implementation date

October 1, 2020

Scope

GB/T 38657-2020 is the English-translated version of 核电厂常规岛低压加热器技术条件.

GB/T 38657-2020 is the Chinese standard "Specifications for low pressure feed water heater for conventional island in nuclear power station".

Its scope clause reads: This standard specifies the performance and design requirements, materials, manufacturing, inspection, and inspection of conventional island low-pressure heaters (hereinafter referred to as low-pressure heaters) in nuclear power plants.

Receiving, performance testing and painting, marking, packaging and transportation requirements. This standard applies to U-shaped tubular low-pressure heaters.

Found what you need?

Document preview — GB/T 38657-2020

National Standard of the People's Republic of China

ICS
27.040
Classification
K 54

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Performance and design requirements
  • 5 Material
  • 6 Manufacturing
  • 7 Inspection and acceptance
  • 8 Performance test
  • 9 Painting, marking, packaging and transportation

1 Scope

This standard specifies the performance and design requirements, materials, manufacturing, inspection, and inspection of conventional island low-pressure heaters (hereinafter referred to as low-pressure heaters) in nuclear power plants.

Receiving, performance testing and painting, marking, packaging and transportation requirements.

This standard applies to U-shaped tubular low-pressure heaters.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 150.1-2011 Pressure Vessel Part 1.General Requirements

GB/T 150.2-2011 Pressure Vessel Part 2.Materials

GB/T 150.3-2011 Pressure Vessel Part 3.Design

GB/T 150.4 Pressure Vessel Part 4.Manufacturing, Inspection and Acceptance

GB/T 151-2014 heat exchanger

GB/T 1804-2000 General Tolerance Tolerance of linear and angular dimensions without tolerance

GB/T 8923.1-2011 Visual assessment of surface cleanliness of steel surface treatment before coating-Part 1.Uncoated

The corrosion level and treatment level of the steel surface and the steel surface after the original coating has been completely removed

GB/T 24593 Austenitic stainless steel welded steel pipes for boilers and heat exchangers

GB/T 25198 Pressure Vessel Head

GB/T 26929 Pressure Vessel Terminology

GB/T 29465 Floating head heat exchanger with outer head cover side flange

HG/T 20592 steel pipe flange (PN series)

HG/T 20615 steel pipe flange (Class series)

JB/T 4711 Pressure vessel coating and transportation packaging

JB/T 5862 Steam Turbine Surface Type Feedwater Heater Performance Test Regulation

NB/T 47008 Carbon steel and alloy steel forgings for pressure equipment

NB/T 47010 stainless steel and heat-resistant steel forgings for pressure equipment

NB/T 47013.2-2015 Non-destructive testing of pressure equipment Part 2.Radiographic testing

NB/T 47013.3-2015 Non-destructive testing of pressure equipment Part 3.Ultrasonic testing

NB/T 47013.4-2015 Non-destructive testing of pressure equipment Part 4.Magnetic particle testing

NB/T 47013.5-2015 Non-destructive testing of pressure equipment Part 5.Penetration testing

NB/T 47013.8-2012 Non-destructive testing of pressure equipment Part 8.Leak detection

NB/T 47013.10-2015 Pressure-bearing equipment non-destructive testing Part 10.Ultrasonic testing by diffraction time difference method

NB/T 47014 welding procedure qualification for pressure equipment

NB/T 47015 Pressure Vessel Welding Regulations

NB/T 47018 Technical conditions for ordering welding materials for pressure equipment

NB/T 47021 Type A flat welding flange […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 27 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38657-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
27 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38657-2020

$475.00