Valid

GB/T 22073-2025General requirements for industrial thermal turbines (English PDF)

工业用热力涡轮机通用要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (48 pages)

Need quotation for your management?

Get a formal quotation for GB/T 22073-2025 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 2, 2025

Implementation date

July 1, 2026

Scope

GB/T 22073-2025 is the English-translated version of 工业用热力涡轮机通用要求.

GB/T 22073-2025 is the Chinese national standard covering the industrial steam and gas turbine — its rating and performance guarantees, the design against the thermal and centrifugal stresses, the rotordynamics and the overspeed protection, the testing and the documentation handed over with it.

At 29,000 words. It replaces GB/T 22073-2008. It was issued on 2 December 2025 and has been in force since 1 July 2026, replacing GB/T 22073-2008. The document is under the responsibility of the China Electrical Equipment Industry Association.

This page is published from the official record of the 2025 edition; the clause text of a standard this recent is not yet in circulation, and the figures, limits and tables it contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — GB/T 22073-2025

National Standard of the People's Republic of China

ICS
27.040
Classification
K 54
Replacing
GB/T 22073-2008

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Symbols and abbreviations
  • 5 Enquiry and bidding
  • 6 Turbines
  • 7 Driven machines, gear units and couplings
  • 8 Auxiliary equipment
  • 9 Lubricating oil and control oil systems
  • 10 Governing and protection systems
  • 11 Special tools
  • 12 Inspection and testing
  • 13 Preparation for transport and storage
  • 14 Foundation
  • 15 Site installation and commissioning
  • 16 Contract documents
  • Annex A (normative) Dynamic requirements
  • Annex B (normative) Detailed requirements for the foundation
  • References

3 Terms and definitions

4 Symbols and abbreviations

5 Enquiry and bidding

6 Turbines

7 Driven machines, gear units and couplings

8 Auxiliary equipment

9 Lubricating oil and control oil systems

10 Governing and protection systems

11 Special tools

12 Inspection and testing

13 Preparation for transport and storage

14 Foundation

15 Site installation and commissioning

16 Contract documents

Foreword

This document was issued on 2 December 2025 by the State Administration for Market Regulation and the Standardization Administration of the People's Republic of China, and has been in force since 1 July 2026.

It replaces GB/T 22073-2008.

The document is under the responsibility of the China Electrical Equipment Industry Association.

Classification: ICS 27.040, CCS K 54.

3 Classification and status

GB/T 22073-2025 is classified under ICS 27.040, in the field of energy and heat transfer engineering. ICS is the International Classification for Standards, the same scheme used by ISO and by the national bodies of most countries, which is what allows a Chinese standard to be placed beside its foreign counterparts on subject rather than on number.

Its Chinese Standard Classification code is CCS K 54. CCS is the domestic scheme, a letter for the sector and two digits for the subject within it, and it is the code by which the standard is filed and searched in China.

The GB/T prefix marks a recommended national standard. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it. In practice that covers most of the cases in which it will be read — a purchase specification, an inspection agreement or a certification scheme.

The document is under the responsibility of the China Electrical Equipment Industry Association, which is the body that maintains it and that will answer a formal question about its interpretation.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 48 pages — is available in the English PDF.

Editions of GB/T 22073

EditionTitleRevisionStatus
GB/T 22073-2025General requirements for industrial thermal turbinescurrent editionCurrent
GB/T 22073-2008General requirements for industrial thermal turbinesprevious editionSuperseded

This page sells the current edition, GB/T 22073-2025. Earlier editions are listed for reference only.

How to Download GB/T 22073-2025

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
48 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 22073-2025

$770.00