Valid

GB/T 38585-2020Technical specification of joint assembling for directly buried insulated pipeline of urban heating (English PDF)

城镇供热直埋管道接头保温技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38585-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 31, 2020

Implementation date

February 1, 2021

Scope

GB/T 38585-2020 is the English-translated version of 城镇供热直埋管道接头保温技术条件.

GB/T 38585-2020 is the Chinese standard "Technical specification of joint assembling for directly buried insulated pipeline of urban heating".

Its scope clause reads: This standard specifies the terms and definitions, classification and applicable conditions, on-site processing, requirements, test methods, inspection rules, marking, transportation, and storage of the joint assembling for directly buried insulated pipeline of urban heating.

This standard is applicable to the joint assembling of prefabricated directly buried hot water insulating pipes (hereinafter referred to as hot water pipes) with a medium design pressure less than or equal to 2.5 MPa, medium temperature less than or equal to 120°C, and occasional peak temperature less than or equal to 140°C, as well as the joint assembling of steel casing pipe prefabricated directly buried steam insulating pipes (hereinafter referred to as steam pipes) with the medium temperature less than or equal to 350°C. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 38585-2020

National Standard of the People's Republic of China

ICS
91.140.10
Classification
P 46

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Classification and applicable conditions
  • 5 On-site processing
  • 6 Requirements
  • 7 Test methods
  • 8 Inspection rules
  • 9 Marking, transportation and storage

1 Scope

This standard specifies the terms and definitions, classification and applicable conditions, on-site processing, requirements, test methods, inspection rules, marking, transportation, and storage of the joint assembling for directly buried insulated pipeline of urban heating.

This standard is applicable to the joint assembling of prefabricated directly buried hot water insulating pipes (hereinafter referred to as hot water pipes) with a medium design pressure less than or equal to 2.5 MPa, medium temperature less than or equal to 120°C, and occasional peak temperature less than or equal to 140°C, as well as the joint assembling of steel casing pipe prefabricated directly buried steam insulating pipes (hereinafter referred to as steam pipes) with the medium temperature less than or equal to 350°C.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 8923.1-2011 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings

GB/T 13350 Glass wool and its products for thermal insulation

GB/T 23257 Polyethylene coating for buried steel pipeline

GB/T 29046 Test methods of technical specification for pre-insulated directly buried district heating pipes

GB/T 29047 Prefabricated directly buried insulating pipes and fittings with polyurethane foamed-plastics and high density polyethylene casing pipes

GB/T 34336 Reinforced nanoporous aerogel products for thermal insulation

GB/T 38105 Urban heating - Steel jacket prefabricated directly buried pipes and fittings with vacuum insulating layers

CJJ/T 104 Technical specification for directly buried steam heating pipeline in city

CJJ/T 254 Technical specification for leakage surveillance system of directly buried heating pipe

CJ/T 246 Preformed directly buried steam insulating pipes and fittings for urban heating

NB/T 47013.3-2015 Nondestructive testing of pressure equipment - Part 3: Ultrasonic testing

SY/T 0063 Test method for leakage detection of pipeline anti-corrosion coating

3 Terms and definitions

For the purposes of this document, the following terms and definitions apply.

3.1 joint assembling

processing of filling insulating materials between the joint out casings to form an insulating structure after connecting adjacent pipelines and pipelines, pipelines and fittings, fittings and fittings […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38585-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38585-2020

$205.00