GB/T 38536-2020Technical specification for the equipment of hot water heating substation (English PDF)
热水热力网热力站设备技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38536-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 6, 2020
Implementation date
February 1, 2021
Scope
GB/T 38536-2020 is the English-translated version of 热水热力网热力站设备技术条件.
GB/T 38536-2020 is the Chinese standard "Technical specification for the equipment of hot water heating substation". Its scope clause reads: This standard stipulates that the heating medium is water, a heating station with a design pressure of 2.5 MPa or less and a design temperature of.200 ° C or less.
Terms, definitions and technical requirements for equipment and accessories. This standard applies to urban heating and hot water heating station equipment, including heat exchangers, water pumps, valves, decontaminants, water treatment equipment, and constant pressure equipment.
Equipment, pipes and fittings, anti-corrosion and insulation, monitoring systems, low-voltage power distribution cabinets and heat exchange units.
Found what you need?
Document preview — GB/T 38536-2020
National Standard of the People's Republic of China
- ICS
- 91.140.10
- Classification
- P 46
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword III
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Basic requirements
- 5 heat exchanger
- 6 Water pump
- 7 valve
- 8 Decontamination device
- 9 Water treatment equipment
- 10 Constant pressure equipment
- 11 Pipes and fittings
- 12 Preservation and insulation
- 13 Monitoring system
- 14 Low-voltage power distribution cabinet
- 15 Heat Exchange Unit
1 Scope
This standard stipulates that the heating medium is water, a heating station with a design pressure of 2.5 MPa or less and a design temperature of.200 ° C or less.
Terms, definitions and technical requirements for equipment and accessories.
This standard applies to urban heating and hot water heating station equipment, including heat exchangers, water pumps, valves, decontaminants, water treatment equipment, and constant pressure equipment.
Equipment, pipes and fittings, anti-corrosion and insulation, monitoring systems, low-voltage power distribution cabinets and heat exchange units.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB 150 pressure vessel
GB/T 151 heat exchanger
GB/T 3091 Welded steel pipe for low-pressure fluid transportation
GB/T 5657 Technical Conditions for Centrifugal Pumps (Class III)
GB 5749 Sanitary Standard for Drinking Water
GB 7251.1 Low-voltage complete switchgear and control equipment. Part 1. General
GB/T 8163 seamless steel pipe for fluid
GB 8624-2012 combustion performance classification of building materials and products
GB/T 11618.1 Copper pipe joints Part 1. Brazed pipe fittings
GB/T 11618.2 Copper pipe joints Part 2. Press fittings
GB/T 12234 Steel gate valve with stud connection bonnet for oil and gas industry
GB/T 12235 Steel globe valve and lift check valve for petroleum, petrochemical and related industries
GB/T 12236 Steel swing check valve for petroleum, chemical and related industries
GB/T 12237 Steel ball valve for petroleum, petrochemical and related industries
GB/T 12238 Flange and Wafer Connection Elastic Seal Butterfly Valve
GB/T 12241 General requirements for safety valves
GB/T 12243 Spring Direct Load Safety Valve
GB/T 12459 Types and parameters of steel butt-welded pipe fittings
GB/T 12771 stainless steel welded steel pipe for fluid transportation
GB/T 13006 Cavitation allowance of centrifugal pump, mixed flow pump and axial flow pump
GB/T 13401 Technical Specification for Steel Butt Welded Fittings
GB/T 14382 Three-pass filter for pipeline
GB/T 15969.1 Programmable controllers Part 1. General information
GB/T 17219 Safety Evaluation Standards for Drinking Water Distribution Equipment and Protective Materials
GB/T 17614.1 Transmitters for industrial process control systems. Part 1. Performance evaluation methods
GB/T 18033 seamless copper water pipe and copper gas pipe
GB/T 18300 Technical conditions for automatic control of sodium ion exchanger […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38536-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38536-2020
$235.00