GB/T 38429.2-2019Explosion protected safety technique of automotive LPG filling stations—Part 2: Explosion protected components related to LPG dispensers and installation requirements (English PDF)
燃气加气站防爆安全技术 第2部分：与液化石油气(LPG)有关的防爆部件和安装要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38429.2-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2019
Implementation date
July 1, 2020
Scope
GB/T 38429.2-2019 is the English-translated version of 燃气加气站防爆安全技术 第2部分：与液化石油气(LPG)有关的防爆部件和安装要求.
GB/T 38429.2-2019 is the Chinese standard "Explosion protected safety technique of automotive LPG filling stations—Part 2: Explosion protected components related to LPG dispensers and installation requirements".
Its scope clause reads: This part of GB/T 38429 specifies requirements for explosion-proof components and installations related to liquefied petroleum gas (LPG) for gas filling stations, Marking, installation testing, installation and commissioning and use, maintenance, inspection.
This section applies to the installation of fixed LPG filling stations and LPG equipment and components for vehicles with multiple fuel filling stations. This section does not include requirements for on-site and off-site safety distances.
Note. For the filling of civil gas cylinders, please refer to this section. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 38429.2-2019
National Standard of the People's Republic of China
- ICS
- 29.260.20
- Classification
- K 35
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword III
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Requirement
- 5 signs
- 6 Installation test
- 7 Installation and commissioning
- 8 Use, maintenance, inspection
- Appendix A (informative) Description Figure
- References
1 Scope
This part of GB/T 38429 specifies requirements for explosion-proof components and installations related to liquefied petroleum gas (LPG) for gas filling stations,
Marking, installation testing, installation and commissioning and use, maintenance, inspection.
This section applies to the installation of fixed LPG filling stations and LPG equipment and components for vehicles with multiple fuel filling stations.
This section does not include requirements for on-site and off-site safety distances.
Note. For the filling of civil gas cylinders, please refer to this section.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 1226 general pressure gauge
GB 3836.14 Explosive atmospheres Part 14. Classification of places for explosive atmospheres
GB/T 3836.16 Explosive atmospheres Part 16. Inspection and maintenance of electrical installations
GB/T 7306.1 55 ° sealed pipe threads. Part 1. Internal cylindrical and tapered external threads
GB/T 9112 steel pipe flange types and parameters
GB/T 12237 Steel ball valve for petroleum, petrochemical and related industries
GB/T 15185 flanged iron and copper ball valves
GB/T 17949.1 Guidelines for measuring soil resistivity, ground impedance and ground potential of grounding systems. Part 1. Routine measurements
GB 25285.1 Explosion prevention and protection in explosive environment Part 1. Basic principles and methods
GB 25286.1 Non-electrical equipment for explosive atmospheres-Part 1. Basic methods and requirements
GB/T 38429.1-2019 Explosion-proof safety technology for gas refueling stations-Part 1. Explosion-proof requirements for LPG refill
GB 50156 Code for Design and Construction of Automobile Gas Stations
3 terms and definitions
The following terms and definitions apply to this document.
3.1 Liquefied petroleumgas; LPG
Under proper pressure and ambient temperature, the main components of petroleum gas that can be stored and processed in liquid phase are propane, butane, and
Small amounts of propylene, butene, pentane and/or pentene.
Note. For automotive LPG, see GB 19159.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38429.2-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 38429.1-2019 — Explosion protected safety technique of automotive LPG filling stations—Part 1: Explosion protected safety technique requirements for LPG dispensers
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 38429.2-2019
$265.00