Valid

GB/T 38427.1-2019Technical requirements for anti-counterfeit via biometrics—Part 1: Face recognition (English PDF)

生物特征识别防伪技术要求 第1部分:人脸识别

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38427.1-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2019

Implementation date

July 1, 2020

Scope

GB/T 38427.1-2019 is the English-translated version of 生物特征识别防伪技术要求 第1部分:人脸识别.

GB/T 38427.1-2019 is the first part of GB/T 38427 on technical requirements for anti-counterfeiting of biometrics, a series the foreword divides into four parts, face recognition, fingerprint identification, iris recognition and test methods.

Clause 1 states that this part specifies the technical requirements for the face recognition process, the production and application process and the anti-counterfeiting level, and that it applies to the production and application of anti-counterfeit products using face recognition technology.

Clause 2 cites GB/T 35678-2017 and GA/T 893-2010, and clause 3 applies their terms while reproducing three definitions from GB/T 35678-2017, one for the distance between the centres of the two eyes expressed as a number of pixels in the face image, one for the conversion of a colour image into a grayscale image, and one for pose, the angle of the human face in three-dimensional space relative to the acquisition device; the term names of the first two are not printed legibly in the draft.

The entry for pose puts the origin of the right-hand Cartesian three-dimensional face coordinate system at the tip of the nose in a full face image and describes pitch (P), pan (Y) and tilt (R) as the rotation angles of the face about the three coordinate axes, clockwise rotation being the positive direction of the axis and counterclockwise rotation the negative.

The contents list clause 4 on the process, split into the verification process and the identification process, clause 5 on the production process, with subclauses on general requirements, viewing photos, machine readable photos and associated photos, clause 6 on the application process, split into target person collection and audiovisual photo collection, and clause 7 on security classification, split into the photo security level, the application security level and the security strength level.

The draft on the page stops at the end of clause 3, so clauses 4 to 7 are not shown. This part is proposed and managed by the National Anti-Counterfeiting Standardization Technical Committee (SAC/TC218). It was issued on 2019-12-31 and has applied since 2020-07-01.

Found what you need?

Document preview — GB/T 38427.1-2019

National Standard of the People's Republic of China

ICS
13.310
Classification
A 90

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Process
  • 4.1 Verification Process
  • 4.2 Identification process
  • 5 Production process
  • 5.1 General requirements
  • 5.2 Viewing Photos
  • 5.3 Machine Readable Photos
  • 5.4 Associated Photos
  • 6 Application process
  • 6.1 Target person collection
  • 6.2 Audiovisual Photo Collection
  • 7 Security classification
  • 7.1 Photo security level
  • 7.2 Application Security Level
  • 7.3 Security strength level

Foreword

GB/T 38427 `` Biometric Identification Anti-counterfeiting Technical Requirements '' is currently divided into the following 4 parts.

--- Part 1. Face recognition;

--- Part 2. Fingerprint identification;

--- Part 3. Iris recognition;

--- Part 4. Test methods.

This part is the first part of GB/T 38427.

This section is drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This part of GB/T 38427 specifies the face recognition process, production and application process, anti-counterfeiting level, etc. skills requirement.

This section applies to the production and application of anti-counterfeit products using face recognition technology.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest version (including all amendments) applies to this document.

GB/T 35678-2017 Image requirements for public safety face recognition applications

GA/T 893-2010 Security biometric identification application term

3 Terms and definitions

GB/T 35678-2017, GA/T 893-2010 and the following terms and definitions apply to this document.

3.1 Space between two eyes

The distance between the centers of the two eyes represented by the number of pixels in the face image. [GB/T 35678-2017, definition 3.1]

3.2 Grayscale image

The process of converting a color image into a grayscale image. [GB/T 35678-2017, definition 3.2]

3.3 Pose

The angle of the human face in the three-dimensional space relative to the acquisition device. The three-dimensional human face coordinate system uses the right-hand Cartesian coordinate system, as shown in Figure 1. in In an image of a full face, the origin of the three-dimensional coordinate system is the tip of the nose. Pitch (P), Pan (Y) and Tilt (R)

Refers to the rotation angle of the human face with respect to the coordinate axes of the three directions of space. The elevation angle rotates around the x-axis, clockwise to the x-axis square Direction, counterclockwise rotation is the negative direction of the x axis; horizontal rotation angle rotates around the y axis, clockwise rotation is the positive direction of the y axis, and counterclockwise rotation is y-axis negative direction; the tilt angle rotates around the z-axis, clockwise rotation is the positive z-axis direction, and counterclockwise rotation is the negative z-axis direction. [GB/T 35678-2017, definition 3.3]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 38427.1-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38427.1-2019

$175.00