GB/T 38286-2019Polyethylene(PE), polypropylene(PP) and polystyrene(PS) resin - Determination of peroxide value (English PDF)
聚乙烯、聚丙烯、聚苯乙烯树脂 过氧化值的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38286-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 10, 2019
Implementation date
November 1, 2020
Scope
GB/T 38286-2019 is the English-translated version of 聚乙烯、聚丙烯、聚苯乙烯树脂 过氧化值的测定.
GB/T 38286-2019 is the Chinese standard "Polyethylene(PE), polypropylene(PP) and polystyrene(PS) resin - Determination of peroxide value". Its scope clause reads: This standard specifies the method for determining the peroxide value of polyethylene, polypropylene and polystyrene resins.
This standard is applicable to the determination of peroxide value of polyethylene, polypropylene and polystyrene resins. Note. Other resins can be measured with reference to this standard.
Its clauses include terms and definitions; method summary; reagents and materials.
Found what you need?
Document preview — GB/T 38286-2019
National Standard of the People's Republic of China
- ICS
- 83.080.01
- Classification
- G 31
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Method summary
- 5 Reagents and materials
1 Scope
This standard specifies the method for determining the peroxide value of polyethylene, polypropylene and polystyrene resins.
This standard is applicable to the determination of peroxide value of polyethylene, polypropylene and polystyrene resins.
Note. Other resins can be measured with reference to this standard.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.
Preparation of GB/T 601 chemical reagent standard titration solution
GB/T 6682 Analysis laboratory water specifications and test methods
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Peroxide value
Ip
The amount of peroxide that can react with sodium thiosulfate in the sample is expressed in millimoles of active oxygen contained in 1000g of sample.
4 Method summary
The sample is immersed in the mixed solution of chloroform/acetic acid, the peroxide dissolved in the solution reacts with the excess potassium iodide solution to generate iodine, and sulfur
Titrate with sodium titrate standard titration solution to calculate the peroxide value of the sample.
5 Reagents and materials
Warning --- Chloroform is a volatile solvent. In order to avoid possible poisoning of the reagents, please protect and keep the experiment personnel in use.
Good ventilation.
Unless otherwise specified, the reagents used are of analytical grade, and the experimental water should meet the requirements of secondary water specified in GB/T 6682.
5.1 Chloroform
superior grade pure.
5.2 Acetic acid
pure grade.
5.3 Chloroform/acetic acid mixed solution
Mix according to the volume ratio of 2. 3.
5.4 Saturated potassium iodide solution
14g potassium iodide, add 10mL of water to dissolve, ensure that there are insoluble crystals, sealed and protected from light.
5.5 Sodium thiosulfate solution
c (Na2S2O3) = 0.1mol/L. Prepare and calibrate according to the requirements of GB/T 601.
5.6 Sodium thiosulfate standard titration solution
c (Na2S2O3) = 0.01mol/L. It is obtained by diluting 5.5 times by 5.5.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38286-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38286-2019
$85.00