Valid

GB/T 38253-2019Integrity management system of houseware enterprise—Requirements (English PDF)

家居用品企业诚信管理体系 要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38253-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 10, 2019

Implementation date

July 1, 2020

Scope

GB/T 38253-2019 is the English-translated version of 家居用品企业诚信管理体系 要求.

GB/T 38253-2019 is the Chinese standard "Integrity management system of houseware enterprise—Requirements".

Its scope clause reads: This standard stipulates the requirements that household goods companies should meet to implement the integrity management system, including corporate environment, leadership, planning, and support Support, commitment fulfillment and tracking, commitment fulfillment evaluation, improvement, etc., to ensure that the system meets the requirements of laws and regulations and meets consumers and related Demand and expectations.

Note. This standard does not include specific requirements for other management systems such as environmental management, occupational health and safety management or financial management.

This standard is applicable to guide the internal construction and operation of the integrity management system of household goods companies, and can also be used to guide the external An enterprise's integrity management system is audited. Its clauses include terms and definitions; principles and operating modes.

Found what you need?

Document preview — GB/T 38253-2019

National Standard of the People's Republic of China

ICS
01.040.03
Classification
A 20

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • Introduction IV
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Principles and operating modes
  • 4.1 Integrity management principles
  • 4.2 System operation mode
  • 4.2.1 General
  • 4.2.2 PDCA cycle
  • 5 Corporate environment
  • 5.1 Understanding the company and its environment
  • 5.2 Understanding the needs and expectations of interested parties
  • 5.3 Determine the scope of the integrity management system
  • 5.4 Integrity management system and process
  • 6 Leadership
  • 6.1 General
  • 6.2 Focus on consumer satisfaction and meeting the needs and expectations of related parties
  • 6.3 Conditions to be met by the integrity policy
  • 6.4 Conditions to be met by the integrity objective
  • 6.5 Conditions to be fulfilled by responsibilities and authorities
  • 7 Planning
  • 7.1 Measures to address risks and opportunities
  • 7.2 Integrity objectives and planning for fulfillment and tracking of commitments
  • 7.3 Planning of changes
  • 8 Support
  • 8.1 Resources
  • 8.1.1 General
  • 8.1.2 Personnel and ability
  • 8.1.3 Information infrastructure
  • 8.1.4 Process operating environment
  • 8.1.5 Resource verification and assessment
  • 8.1.6 Corporate Knowledge
  • 8.2 Cultivation of Integrity
  • 8.3 Communication
  • 8.4 Documented information
  • 8.4.1 General
  • 8.4.2 Create and update
  • 8.4.3 Version management
  • 9 Commitment and Tracking
  • 9.1 Planning and control
  • 9.2 Commitment identification and determination
  • 9.2.1 Product and service requirements
  • 9.2.2 External process control
  • 9.2.3 Production and service provision
  • 9.3 Commitment and tracking
  • 9.3.1 Analysis, identification and confirmation of internal influence factors
  • 9.3.2 Analysis, identification and confirmation of external factors
  • 9.3.3 Performance of social responsibilities
  • 9.3.4 Information exchange and management
  • 9.3.5 Integrity Risk Management
  • 9.3.6 Emergency preparedness and response
  • 9.3.7 Integrity Culture Construction
  • 10 Commitment to honor evaluation
  • 10.1 Evaluation of personnel
  • 10.2 Analysis, identification and determination to meet the needs and expectations of consumers and related parties
  • 10.3 Evaluation of Commitment
  • 10.4 Verification and analysis of the achievement of integrity objectives
  • 10.5 Dishonest assessment and disposal
  • 10.5.1 General
  • 10.5.2 Evaluation target
  • 10.5.3 Evaluation content
  • 10.5.4 Dealing with dishonesty
  • 11 Improvement
  • 11.1 General
  • 11.2 Nonconformance and corrective actions
  • 11.3 Continuous improvement
  • Appendix A (informative appendix) Audit of the household goods enterprise integrity management system

1 Scope

This standard stipulates the requirements that household goods companies should meet to implement the integrity management system, including corporate environment, leadership, planning, and support

Support, commitment fulfillment and tracking, commitment fulfillment evaluation, improvement, etc., to ensure that the system meets the requirements of laws and regulations and meets consumers and related

Demand and expectations.

Note. This standard does not include specific requirements for other management systems such as environmental management, occupational health and safety management or financial management.

This standard is applicable to guide the internal construction and operation of the integrity management system of household goods companies, and can also be used to guide the external

An enterprise's integrity management system is audited.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article

Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.

GB/T 19000 Quality Management System Foundation and Terminology

GB/T 19011 Management System Audit Guidelines

GB/T 22117 Basic terms of credit

GB/T 31950 Enterprise Credit Management System

3 Terms and definitions

The terms and definitions defined in GB/T 22117, GB/T 19000, GB/T 19011 and GB/T 31950 and the following apply to this file.

3.1 Houseware

Items needed for daily life.

Note. Including furniture, bedding, kitchen appliances, indoor accessories, etc.

3.2 Integrity management

The company establishes the corresponding commitments in accordance with the integrity policy and integrity objectives, and tracks the process of fulfilling the commitments and carries out evaluations of the realization

A series of interrelated activities such as price and improvement.

3.3 Integrity management system integrity management system; IMS

Businesses determine their integrity goals and activities to determine their processes and required resources to achieve the desired results.

Note. Rewrite GB/T 31950-2015, definition 3.3.

4 Principles and operating modes

4.1 Integrity management principles

Integrity management is one of the important contents of household goods enterprise management. This standard is to enhance household goods enterprises to satisfy consumers and related parties […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38253-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38253-2019

$425.00