GB/T 38229-2019Test method for hazard classification of tricresyl phosphate (English PDF)
磷酸三甲苯酯危险特性分类方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38229-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 18, 2019
Implementation date
May 1, 2020
Scope
GB/T 38229-2019 is the English-translated version of 磷酸三甲苯酯危险特性分类方法.
GB/T 38229-2019 is the Chinese standard "Test method for hazard classification of tricresyl phosphate". Its scope clause reads: This standard specifies the equipment and materials, test procedures and hazard characteristics of the test methods required for the classification of hazardous properties of tricresyl phosphate.
This standard applies to the classification of dangerous goods for tricresyl phosphate dangerous goods. Its clauses include terms and definitions; method summary; reagents and materials.
Found what you need?
Document preview — GB/T 38229-2019
National Standard of the People's Republic of China
- ICS
- 13.300
- Classification
- A 80
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Method summary
- 5 reagents and materials
1 Scope
This standard specifies the equipment and materials, test procedures and hazard characteristics of the test methods required for the classification of hazardous properties of tricresyl phosphate.
This standard applies to the classification of dangerous goods for tricresyl phosphate dangerous goods.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
United Nations "Provisions of Recommendations on the Transport of Dangerous Goods" (19th revised edition) (Recommendationsonthetrans- portofdangerousgoods-Modelregulations)
International Maritime Dangerous Goods Code (38-16th Edition) (Internationalmaritimedangerousgoodscode)
Technical Regulations for the Safety of Airborne Dangerous Goods (No..2016-2017) (Technicalinstructionsforthesafetransportof
Dangerousgoodsbyair)
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Classification of dangerous characteristics
Chemicals in accordance with the UN Model Regulations on the Transport of Dangerous Goods (TDG), International Maritime Dangerous Goods Code (IMDG), International Technical Regulations for the Safety of Airborne Dangerous Goods (ICAO-TI) or national industry standards for transport hazard identification
Determine the type of transport hazard and the degree of hazard.
4 Method summary
A certain amount of tricresyl phosphate was weighed into an ethyl acetate solution, filtered through an organic filter membrane, and then subjected to gas chromatography-mass spectrometry.
Analysis, external standard method quantitative. The hazardous properties were determined based on the content of tri-o-tolyl phosphate in tricresyl phosphate. Tri-phosphoric acid in this method
The limit of detection of the toluene ester was 10 mg/kg.
5 reagents and materials
5.1 Ethyl acetate
chromatographically pure.
5.2 Tri-o-tolyl phosphate standard
purity >= 99%.
5.3 Tri-o-tolyl phosphate standard stock solution
accurately weigh 25mg of tri-o-tolyl phosphate standard, accurate to 0.1mg, placed
Dissolve in ethyl acetate with a 250 mL volumetric flask and bring up to volume and mix. The solution has a mass concentration of 100 mg/L.
5.4 Preparation of standard working solution
accurately transfer 0.1mL, 0.50mL, 1.0mL, 2.0mL, 4.0mL, 6.0mL, 8.0mL respectively […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38229-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38229-2019
$150.00