GB/T 38203-2019Determination of fatty acid methyl esters(FAME) in aviation turbine fuel - HPLC evaporative light scattering detector method (English PDF)
航空涡轮燃料中脂肪酸甲酯含量的测定 高效液相色谱蒸发光散射检测器法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38203-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 18, 2019
Implementation date
May 1, 2020
Scope
GB/T 38203-2019 is the English-translated version of 航空涡轮燃料中脂肪酸甲酯含量的测定 高效液相色谱蒸发光散射检测器法.
GB/T 38203-2019 is the Chinese standard "Determination of fatty acid methyl esters(FAME) in aviation turbine fuel - HPLC evaporative light scattering detector method".
Its scope clause reads: This standard specifies the determination of fatty acid methyl esters in aviation turbine fuels using high performance liquid chromatography evaporative light scattering detectors. method.
This standard applies to the determination of samples of fatty acid methyl esters in aviation turbine fuels ranging from 3.0 mg/kg to 140 mg/kg. Note. The fatty acid methyl ester obtained from coconut oil is highly volatile and should not be measured using this standard. Its clauses include method summary; instruments.
Found what you need?
Document preview — GB/T 38203-2019
National Standard of the People's Republic of China
- ICS
- 75.160.20
- Classification
- E 31
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Method summary
- 4 instruments
1 Scope
This standard specifies the determination of fatty acid methyl esters in aviation turbine fuels using high performance liquid chromatography evaporative light scattering detectors.
method.
This standard applies to the determination of samples of fatty acid methyl esters in aviation turbine fuels ranging from 3.0 mg/kg to 140 mg/kg.
Note. The fatty acid methyl ester obtained from coconut oil is highly volatile and should not be measured using this standard.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 1884 Determination of density of crude oil and liquid petroleum products - Densitometric method
GB/T 1885 petroleum meter
GB/T 4756 petroleum liquid manual sampling method
GB 6537-2018 No. 3 jet fuel
GB/T 27867 automatic sampling method for petroleum liquid pipeline
NB/SH/T 0831 Determination of fatty acid methyl esters and methyl linolenic acid in biodiesel - Gas chromatography
SH/T 0604 Determination of density of crude oil and petroleum products (U-shaped vibrating tube method)
3 Method summary
Conducting fatty acid methyl esters in aerospace turbine fuel samples with hydrocarbon matrices using high performance liquid chromatography with a normal phase silica column
Separation, detection of different components by an evaporative light scattering detector. Qualitative and quantitative analysis of fatty acid methyl ester components by the same standard
The mixed standard was compared. If the fatty acid methyl ester content in the sample exceeds the range of the standard curve, it is jetted with no fatty acid methyl ester.
The material is diluted.
4 instruments
4.1 High Performance Liquid Chromatograph (HPLC)
Evaporative light scattering detector is configured, and the maximum allowable injection volume of the sample valve system is.200 µL. Chromatograph
The operating conditions should be met.
Note. The HPLC instrument can be equipped with a column oven to control the operating temperature to 35 °C.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38203-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 38203-2019
$205.00