Valid

GB/T 38105-2019Urban heating—Steel jacket prefabricated directly buried pipes and fittings with vacuum insulating layers (English PDF)

城镇供热 钢外护管真空复合保温预制直埋管及管件

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38105-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 18, 2019

Implementation date

September 1, 2020

Scope

GB/T 38105-2019 is the English-translated version of 城镇供热 钢外护管真空复合保温预制直埋管及管件.

GB/T 38105-2019 is the Chinese standard "Urban heating—Steel jacket prefabricated directly buried pipes and fittings with vacuum insulating layers".

Its scope clause reads: This standard specifies the terms and definitions, structure, materials and properties, requirements, test methods, inspection rules, marking, transportation, and storage of steel jacket prefabricated directly buried pipes and fittings with vacuum insulating layers.

This standard is applicable to the steel jacket prefabricated directly buried pipes and fittings with vacuum insulating layers with working pressure of heating medium less than or equal to 2.5 MPa and the design temperature less than or equal to 350°C (steam) or design temperature less than or equal to 200°C (hot water) (hereinafter referred to as “thermal insulation pipes and fittings"). Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 38105-2019

National Standard of the People's Republic of China

ICS
91.140.10
Classification
P 46

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Structure
  • 4.1 Thermal insulation pipe
  • 4.2 Thermal insulation fittings
  • 5 Material and properties
  • 6 Requirements
  • 6.1 Working steel pipe
  • 6.2 Steel fitting
  • 6.3 Heat preservation layer
  • 6.4 Vacuum layer
  • 6.5 Steel jacket
  • 6.6 Anti-corrosive coating
  • 6.7 Thermal insulation pipe
  • 6.8 Thermal insulation fittings
  • 7 Test methods
  • 7.1 Working steel pipe
  • 7.2 Steel fitting
  • 7.3 Heat preservation layer
  • 7.4 Vacuum layer
  • 7.5 Steel jacket
  • 7.6 Anti-corrosive coating
  • 7.7 Thermal insulation pipe
  • 7.8 Thermal insulation fittings
  • 8 Inspection rules
  • 8.1 End-of-manufacturing inspection
  • 8.2 Type inspection
  • 9 Marking, transportation and storage
  • 9.1 Marking
  • 9.2 Transportation
  • 9.3 Storage
  • Annex A (Normative) Thermal insulation joint
  • Annex B (Informative) Design, realization and maintenance of vacuum system

1 Scope

This standard specifies the terms and definitions, structure, materials and properties, requirements, test methods, inspection rules, marking, transportation, and storage of steel jacket prefabricated directly buried pipes and fittings with vacuum insulating layers.

This standard is applicable to the steel jacket prefabricated directly buried pipes and fittings with vacuum insulating layers with working pressure of heating medium less than or equal to 2.5 MPa and the design temperature less than or equal to 350°C (steam) or design temperature less than or equal to 200°C (hot water) (hereinafter referred to as “thermal insulation pipes and fittings") .

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 699 Quality carbon structure steels

GB/T 700 Carbon structural steels

GB/T 3091 Welded steel pipes for low pressure liquid delivery

GB/T 8163 Seamless steel pipes for liquid service

GB/T 8923.1 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings

GB/T 9711 Petroleum and natural gas industries - Steel pipe for pipeline transportation systems

GB/T 12459 Steel buttwelding pipe fittings - Types and parameter

GB/T 13350 Glass wool and its products for thermal insulation

GB/T 13401 Steel buttwelding pipe fittings - Technical specification

GB/T 23257 Polyethylene coating for buried steel pipeline

GB/T 28638-2012 Heat loss test for thermal insulation structure and evaluation methods for thermal insulation efficiency of district heating pipes

GB/T 29046-2012 Test methods of technical specification for pre-insulated directly buried district heating pipes

GB/T 34336 Reinforced nanoporous aerogel products for thermal insulation

CJJ 28 Code for construction and acceptance of city heating pipelines

CJJ/T 104-2014 Technical specification for directly buried steam heating pipeline in city

HG/T 3831 Spray polyurea for materials protection

NB/T 47013.2 Nondestructive testing of pressure equipment - Part 2: Radiographic testing

NB/T 47013.3 Nondestructive testing of pressure equipment - Part 3: Ultrasonic testing

NB/T 47013.5 Nondestructive testing of pressure equipments - Part 5: Penetrant testing

SY/T 0063 Test method for leakage detection of pipeline anti-corrosion coating

SY/T 0315 Technological specification of external fusion bonded epoxy coating for steel pipeline

SY/T 5037 Submerged arc-welded steel pipe for common fluid service pipeline

SY/T 5257 Steel bends for oil and gas transmission

3 Terms and definitions

For the purposes of this document, the following terms and definitions apply.

3.1 inside sliding support

pipe support which makes the working steel pipe and the steel jacket have relative axial and lateral displacement in the thermal insulation pipe

3.2 inside guiding support

pipe support which makes the working steel pipe and the steel jacket have relative axial displacement in the thermal insulation pipe

3.3 vacuum layer

air layer with a certain degree of vacuum, which is sealed between the outer surface of the insulation material layer and the inner surface of the steel jacket

3.4 inside fixed support

pipeline fittings that prevent relative displacement between working steel pipe and steel jacket

3.5 outside fixed support

pipeline fittings that prevent relative displacement between steel jacket and fixed pier

3.6 inside and outside fixed support

pipeline fittings that prevent relative displacement among working steel pipe, steel jacket and fixed pier

3.7 insulation layer

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Similar standards

How to Download GB/T 38105-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
17 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38105-2019

$295.00