GB/T 38080-2019Technical requirements for safety environment and occupational health in mobile laboratory (English PDF)
移动实验室安全、环境和职业健康技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38080-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 18, 2019
Implementation date
May 1, 2020
Scope
GB/T 38080-2019 is the English-translated version of 移动实验室安全、环境和职业健康技术要求.
GB/T 38080-2019 is the Chinese standard "Technical requirements for safety environment and occupational health in mobile laboratory". Its scope clause reads: This standard specifies the terms, definitions, requirements, and verification methods for mobile laboratory safety, environment, and occupational health.
This standard is applicable to the physical and chemical analysis and detection mobile laboratory for terrestrial use. Other mobile laboratories may refer to this standard for implementation.
Found what you need?
Document preview — GB/T 38080-2019
National Standard of the People's Republic of China
- ICS
- 13.100
- Classification
- C 65
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Requirements
- 5 Confirmation Method
- Appendix A (Normative Appendix) Motor Acceleration Outside Noise Limit
- Appendix B (Normative Appendix) Local Exhaust Facility Controls Wind Speed Limit
1 Scope
This standard specifies the terms, definitions, requirements, and verification methods for mobile laboratory safety, environment, and occupational health.
This standard is applicable to the physical and chemical analysis and detection mobile laboratory for terrestrial use. Other mobile laboratories may refer to this standard for implementation.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB 1495 Vehicle Accelerated Vehicle Outboard Noise Limit and Measurement Method
GB 1589 Car, trailer and car train profile size, axle load and mass limit
GB 2893 security color
GB 2894 safety signs and guidelines for their use
GB/T 5699 lighting measurement method
GB/T 5700 lighting measurement method
GB/T 7144 gas cylinder color mark
Basic identification color, identification symbol and safety identification of GB 7231 industrial pipeline
GB 7258 Motorcycle Operation Safety Technical Conditions
GB/T 11651 personal protective equipment selection specification
GB/T 12674 car mass (weight) parameter determination method
General ergonomic requirements for GB/T 14774 work seats
GB 15603 General rules for the storage of common chemical dangerous goods
General technical conditions for GB/T 17275 freight trailers
GB 17914 flammable and explosive commodity storage and maintenance technical conditions
GB 17915 Corrosive commodity storage and maintenance technical conditions
GB 17916 Technical conditions for storage and maintenance of poisonous commodities
General technical conditions for GB/T 23336 semi-trailer
GB/T 29474-2012 General specifications for interior materials for mobile laboratories
GB/T 29476 General specifications for mobile laboratory equipment
GB/T 29477 General specifications for mobile laboratory test chambers
GB/T 29478 Mobile Laboratory Hazardous Waste Management Regulations
GB/T 31017 Mobile Lab Terminology
GB/T 31019-2014 Mobile laboratory ergonomics design guide
GB 50019 Industrial building heating ventilation and air conditioning design specification
GB 50033 Architectural lighting design standard
GB 50034 Architectural Lighting Design Standard
GB 50073 clean factory design specification
GBZ 2.1 Occupational exposure limits for workplace hazards Part 1. Chemically harmful factors […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 38080-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 38080-2019
$235.00