GB/T 38053-2019General technical specifications of prefabricated supports and hangers (English PDF)
装配式支吊架通用技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38053-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 18, 2019
Implementation date
September 1, 2020
Scope
GB/T 38053-2019 is the English-translated version of 装配式支吊架通用技术要求.
GB/T 38053-2019 is the Chinese standard "General technical specifications of prefabricated supports and hangers". Its scope clause reads: This standard specifies the terms and definitions, materials, requirements, test methods, inspection rules, marking, packaging, transportation and storage of assembled hangers.
Save and so on. This standard is applicable to municipal and construction engineering pipelines.
The temperature of the conveying medium is -20 ° C ~ 150 ° C, and the system pressure is less than or equal to 1.6MPa, pipe nominal size is DN10~DN300, water supply and drainage, gas, heat, electricity, heating, ventilation, air conditioning and fire protection systems The support and hanger with gravity as the main load. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 38053-2019
National Standard of the People's Republic of China
- ICS
- 91.060.01
- Classification
- Q 70
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 material
- 5 Requirements
- 6 Test method
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- Appendix A (Normative Appendix) Evaluation of Test Results
1 Scope
This standard specifies the terms and definitions, materials, requirements, test methods, inspection rules, marking, packaging, transportation and storage of assembled hangers.
Save and so on.
This standard is applicable to municipal and construction engineering pipelines. The temperature of the conveying medium is -20 ° C ~ 150 ° C, and the system pressure is less than or equal to
1.6MPa, pipe nominal size is DN10~DN300, water supply and drainage, gas, heat, electricity, heating, ventilation, air conditioning and fire protection systems
The support and hanger with gravity as the main load.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 93 standard spring washer
GB/T 95 flat washer C grade
GB/T 191 packaging storage and transportation icon
GB/T 1804 General tolerances No tolerances for linear and angular dimensions tolerances
GB/T 3098.1-2010 Fastener mechanical properties bolts, screws and studs
GB/T 3098.2-2015 fastener mechanical properties nut
GB/T 3098.6 Mechanical properties of fasteners Stainless steel bolts, screws and studs
GB/T 3098.15 fastener mechanical properties stainless steel nut
GB/T 3274 carbon structural steel and low alloy structural steel hot rolled steel sheet and strip
GB/T 3280 stainless steel cold rolled steel plate and strip
General technical requirements for GB/T 6725 cold-formed steel
GB/T 9799 treated zinc coating on steel and other inorganic coatings
GB/T 10125 artificial atmosphere corrosion test salt spray test
Technical requirements and test methods for hot-dip galvanized coating of GB/T 13912 metal-clad steel parts
GB/T 15389 screw
GB/T 18684 zinc chromium coating technical conditions
JG/T 160-2017 mechanical anchor bolt for concrete
3 Terms and definitions
The following terms and definitions apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 38053-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 38053-2019
$205.00