GB/T 37857-2019Thermoforming disposable urine cup made by polylactic acid (English PDF)
聚乳酸热成型一次性验尿杯
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37857-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
March 1, 2020
Scope
GB/T 37857-2019 is the English-translated version of 聚乳酸热成型一次性验尿杯.
GB/T 37857-2019 is the Chinese standard "Thermoforming disposable urine cup made by polylactic acid". Its scope clause reads: This standard specifies the terminology and definition of polylactic acid (PLA) thermoformed disposable urine test cup (hereinafter referred to as "test cup").
Righteousness, requirements, test methods, inspection rules and signs, packaging, transportation and storage, shelf life. This standard is applicable to disposable urine test cups made of polylactic acid as raw materials through extrusion of sheets and thermoforming. Its clauses include terms and definitions; requirements.
Found what you need?
Document preview — GB/T 37857-2019
National Standard of the People's Republic of China
- ICS
- 83.080.01
- Classification
- G 30
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 requirements
1 Scope
This standard specifies the terminology and definition of polylactic acid (PLA) thermoformed disposable urine test cup (hereinafter referred to as "test cup").
Righteousness, requirements, test methods, inspection rules and signs, packaging, transportation and storage, shelf life.
This standard is applicable to disposable urine test cups made of polylactic acid as raw materials through extrusion of sheets and thermoforming.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2828.1. Sampling procedures for sampling by sampling - Part 1 . Batch-to-batch sampling plan, searched by AQL GB/T 6682 Analytical laboratory water specifications and test methods
GB 15979-2002 Hygienic standard for disposable sanitary products
GB/T 19277.1 Determination of the final aerobic biodegradability of materials under controlled composting conditions
Method of Part 1. General Method
GB/T 20197-2006 Definition, classification, identification and degradation performance requirements of degradable plastics
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Disposable urine cup
A disposable cup for collecting urine.
3.2 Thermoforming
Thermoplastic sheets or other profiles are usually heat-softened on a mold and then shaped by cooling.
4 requirements
4.1 Appearance
4.1.1
The cup body is not allowed to have cracks or gaps.
4.1.2
The surface should be smooth, free of scratches and flashing, and there should be no obvious scratches or scratches on the inner wall.
4.1.3
The cup should be free of smudges and precipitates.
4.1.4
If there is a tick mark on the cup body, the tick mark should be clear and complete.
4.2 Stability
Place on an inclined surface with a slope of 10°, and the urine test cup should not be dumped.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37857-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37857-2019
$145.00