GB/T 37841-2019Test method for puncture resistance of plastic film and sheeting (English PDF)
塑料薄膜和薄片耐穿刺性测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37841-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 30, 2019
Implementation date
March 1, 2020
Scope
GB/T 37841-2019 is the English-translated version of 塑料薄膜和薄片耐穿刺性测试方法.
GB/T 37841-2019 is the Chinese standard "Test method for puncture resistance of plastic film and sheeting". Its scope clause reads: This standard specifies the test principle, instrument, sample and state adjustment, puncture speed, test step of puncture resistance of plastic film and sheet.
Test results, test reports. This standard applies to soft plastic films and sheets with a thickness of less than 1mm. Its clauses include terms and definitions; principle.
Found what you need?
Document preview — GB/T 37841-2019
National Standard of the People's Republic of China
- ICS
- 83.140.10
- Classification
- G 31
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Principle
1 Scope
This standard specifies the test principle, instrument, sample and state adjustment, puncture speed, test step of puncture resistance of plastic film and sheet.
Test results, test reports.
This standard applies to soft plastic films and sheets with a thickness of less than 1mm.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 1040.1 Determination of tensile properties of plastics - Part 1. General
Standard environment for GB/T 2918 plastic sample conditioning and testing
GB/T 6672 Plastic film and sheet thickness determination mechanical measurement
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Puncture resistance
The ability of the film and sheet to resist penetration by the puncture needle.
Note. expressed in terms of puncture resistance, puncture resistance or puncture elongation.
3.2 Puncture resistance
The maximum force required for the needle to penetrate the specimen vertically.
3.3 Puncture resistance
The puncture resistance of the sample unit thickness.
3.4 Puncture elongation
After the puncture needle contacts the sample, the force value reaches the pre-stress as the starting point until the displacement distance of the puncture needle when the sample penetrates.
4 Principle
The sample is fixed between the two clamping rings, and the puncture needle vertically spurs the center position of the sample at a constant rate, and records the sample subjected to the puncture.
Load and puncture elongation.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 37841-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 37841-2019
$90.00