GB/T 37643-2019PLA filament for fused deposition modeling (English PDF)
熔融沉积成型用聚乳酸(PLA)线材
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37643-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 4, 2019
Implementation date
January 1, 2020
Scope
GB/T 37643-2019 is the English-translated version of 熔融沉积成型用聚乳酸(PLA)线材.
GB/T 37643-2019 is the Chinese standard "PLA filament for fused deposition modeling". Its scope clause reads: This standard specifies the marking, technical requirements, test methods, inspection rules, signs, and packages of polylactic acid (PLA) wires for fused deposition molding.
Loading, transport and storage. This standard is applicable to plastic wire for fused deposition three-dimensional (3D) printing using polylactic acid (PLA) resin as the main raw material. Its clauses include terms and definitions; mark.
Found what you need?
Document preview — GB/T 37643-2019
National Standard of the People's Republic of China
- ICS
- 83.080.01
- Classification
- Y 28
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 mark
1 Scope
This standard specifies the marking, technical requirements, test methods, inspection rules, signs, and packages of polylactic acid (PLA) wires for fused deposition molding.
Loading, transport and storage.
This standard is applicable to plastic wire for fused deposition three-dimensional (3D) printing using polylactic acid (PLA) resin as the main raw material.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Plastics -- Determination of density of non-foam plastics -- Part 1 . Dipping method, liquid pycnometer method and titration method
Determination of tensile properties of plastics - Part 2. Test conditions for moulding and extruded plastics
GB/T 2828.1. Sampling procedures for sampling by sampling - Part 1 . Batch-to-batch sampling plan, searched by AQL Standard environment for GB/T 2918 plastic sample conditioning and testing
GB/T 3682.1-2018 Plastic thermoplastic melt mass flow rate (MFR) and melt volume flow rate (MVR)
Determination of Part 1. Standard methods
GB/T 15337 General rules for atomic absorption spectrometry
Plastics - Differential scanning calorimetry (DSC) - Part 3. Determination of melting and crystallization temperature and enthalpy
GB/T 24281 Textiles - Determination of organic volatiles - Gas chromatography - mass spectro
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Fused deposition molding
The linear hot melt material is heated and melted by a heater of a printer nozzle, and extruded through a nozzle having a certain aperture, according to a computer
The slicing model, deposited on the printing panel, is rapidly cooled and solidified after being discharged and bonded to the previous layer of material, formed by layering of the material.
A method of forming the final product.
4 mark
The product is marked according to specifications, materials, colors and net content, as shown in Figure 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37643-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37643-2019
$145.00