GB/T 37554-2019Performance test code on deaerator (English PDF)
除氧器性能试验规程
This is a limited preview
Buy now to download the full PDF (24 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37554-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 4, 2019
Implementation date
January 1, 2020
Scope
GB/T 37554-2019 is the English-translated version of 除氧器性能试验规程.
GB/T 37554-2019 is the Chinese standard "Performance test code on deaerator".
Its scope clause reads: This standard specifies the method and procedure for the performance test of deaerator for dissolved oxygen concentration <=75µg/L. This standard applies to deaerator heaters and deaerators with surface exhaust condensation devices or hybrid exhaust gas condensation devices. Its clauses include terms and definitions; symbol.
Found what you need?
Document preview — GB/T 37554-2019
National Standard of the People's Republic of China
- ICS
- 27.040
- Classification
- K 54
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 symbol
- 5 General
- 6 Measuring instruments and methods
- 7 result calculation
- 8 Test report
- Appendix A (informative) Typical deaerator measuring point arrangement
- Appendix B (informative) Calculation example
1 Scope
This standard specifies the method and procedure for the performance test of deaerator for dissolved oxygen concentration <=75µg/L.
This standard applies to deaerator heaters and deaerators with surface exhaust condensation devices or hybrid exhaust gas condensation devices.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2624 (all parts) Measuring full pipe fluid flow with a differential pressure device installed in a circular cross-section pipe
GB/T 8117 (all parts) Steam turbine thermal performance acceptance test procedures
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Heat load heatingload
The amount of heat that the steam transfers to the feed water in the deaerator per unit time.
3.2 Dissolved oxygen concentration
The concentration of residual dissolved oxygen in the feed water after deaeration.
3.3 Water supply terminal difference
The difference between the saturation temperature of the feed water and the deaerator outlet water temperature at the deaerator operating pressure.
3.4 Potentiometric titration
A method of determining the end point of a measured substance by measuring a change in potential during the titration.
4 symbol
This standard uses the symbols specified in Table 1 and their definitions unless otherwise stated.
Table 1 Performance parameter symbols and definitions
Name symbol unit definition description
Heat load QW heat transferred to the feed water
Actual steam flow into the deaerator Ws kg/s Actual supply of steam flow (including loss) for deaeration, heating and venting
Ideal steam flow rate into the deaerator W's kg/s Assuming the end difference is zero, calculate the total steam flow required
Deaerator heating steam inlet pressure ps kPa -
Deaerator heating steam inlet temperature ts °C - […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.
Similar standards
How to Download GB/T 37554-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37554-2019
$415.00