Valid

GB/T 37438-2019Basic requirement and evaluation method of production condition for yacht manufacturing companies (English PDF)

游艇生产企业生产条件基本要求及其评价方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (97 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37438-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 10, 2019

Implementation date

December 1, 2019

Scope

GB/T 37438-2019 is the English-translated version of 游艇生产企业生产条件基本要求及其评价方法.

GB/T 37438-2019 is the Chinese standard "Basic requirement and evaluation method of production condition for yacht manufacturing companies". Its scope clause reads: This standard stipulates the basic requirements for production conditions and evaluation methods of enterprises engaged in yacht production (including construction and modification).

This standard is applicable to the evaluation of the production conditions of all types of aluminum and fiber reinforced plastic yacht manufacturers. Other non-metallic materials (such as Polyethylene B) The evaluation of the production conditions of yachts and other yacht manufacturers can be referred to.

This standard does not apply to the evaluation of the production conditions of steel and wooden yacht production enterprises. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 37438-2019

National Standard of the People's Republic of China

ICS
47.020
Classification
U 18

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Principles for the division of yacht production enterprises
  • 4.1 Yacht Classification
  • 4.2 Determination of the captain
  • 4.3 Enterprise Rating
  • 4.4 Inclusion Principle
  • 4.5 Classification of aluminum yacht production enterprises
  • 4.6 Classification of fiber reinforced plastic yacht manufacturers
  • 5 Yacht manufacturer evaluation
  • 5.1 Evaluation method
  • 5.2 Data review
  • 5.3 Site evaluation
  • 5.4 On-site evaluation basis
  • 5.5 On-site evaluation score and qualification judgment
  • 6 General requirements and evaluation methods (50 points)
  • 6.1 breakdown and score
  • 6.2 Policy Requirements
  • 6.3 Business License
  • 6.4 Registered funds (20 points)
  • 6.5 Production land (30 points)
  • 7 Production facility requirements and evaluation methods (200 points)
  • 7.1 Aluminum yacht production enterprise production facilities
  • 7.2 Production facilities for fiber reinforced plastic yacht production enterprises
  • 8 Production equipment requirements and evaluation methods (150 points)
  • 8.1 Aluminum yacht production enterprises production equipment
  • 8.2 Fiber reinforced plastic yacht production enterprises production equipment
  • 9 Logistics warehousing requirements and evaluation methods (50 points)
  • 9.1 breakdown and score
  • 9.2 Logistics (15 points)
  • 9.3 Warehousing (35 points)
  • 10 Measurement and testing requirements and evaluation methods (100 points)
  • 10.1 Breakdown and Score
  • 10.2 General Requirements
  • 10.3 Measuring instruments (50 points)
  • 10.4 Testing Equipment (50 points)
  • 11 Human Resource Requirements and Evaluation Methods (100 points)
  • 11.1 Breakdown and Score
  • 11.2 Person in charge of enterprise technology and quality (20 points)
  • 11.4 Quality Inspector (15 points)
  • 11.5 Technical workers (20 points)
  • 11.6 Other Technicians (10 points)
  • 12 Quality Management Requirements and Evaluation Methods (250 points)
  • 12.1 breakdown and score
  • 12.2 Quality Management System (40 points)
  • 12.3 Quality Policy and Quality Objectives (10 points)
  • 12.4 Quality Management Documents (30 points)
  • 12.5 Procurement Quality Control (20 points)
  • 12.6 Quality Control of Production Process (20 points)
  • 12.7 Warehouse and raw material management (15 points)
  • 12.8 Quality Information Management (10 points)
  • 12.9 Technical Management (25 points)
  • 12.10 Personnel Management (20 points)
  • 12.11 Quality Inspection Management (15 points)
  • 12.12 Outsourcing and Leasing Management (15 points)
  • 12.13 Facilities and Equipment Management (20 points)
  • 12.14 Measurement Management (10 points)
  • 13 Environmental, Safety and Health Requirements and Evaluation Methods (70 points)
  • 13.1 Breakdown and Score
  • 13.2 Environmental Protection (25 points)
  • 13.3 Safety Production (25 points)
  • 13.4 Occupational Health (20 points)
  • 14 After-sales service requirements and evaluation methods (30 points)
  • Appendix A (Normative Appendix) Data Review Checklist
  • Appendix B (informative appendix) on-site evaluation record of yacht production enterprises

1 Scope

This standard stipulates the basic requirements for production conditions and evaluation methods of enterprises engaged in yacht production (including construction and modification).

This standard is applicable to the evaluation of the production conditions of all types of aluminum and fiber reinforced plastic yacht manufacturers. Other non-metallic materials (such as Polyethylene B)

The evaluation of the production conditions of yachts and other yacht manufacturers can be referred to.

This standard does not apply to the evaluation of the production conditions of steel and wooden yacht production enterprises.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

ISO 14409 Ship and marine technology ship launching airbag (Shipsandmarinetechnology-Shiplaunchingair

Bags).

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Yacht

A vessel engaged in non-commercial sightseeing, recreation and other activities.

3.2 Captain yachtlength

The horizontal distance from the front end to the end of the structure of the yacht.

Note. The length of the boat includes all structural and component parts of the boat, such as the first or tail post, the bulwark and the hull/deck connection, excluding the structural integrity of the boat.

Removable components, such as consoles on both ends of the boat, header attachments, rudders, outboard engines and their mounting brackets and mounting platforms, diving platforms, boarding platforms,

Rubber fenders and bumpers. For a catamaran, the length of each hull is measured separately, and the longest one is the length of the hull.

3.3 Aluminum yacht

The hull is constructed of aluminum alloy.

3.4 Fiber reinforced plastic yacht

The hull is constructed of fiber reinforced plastic.

3.5 Ordinary yacht generalyacht

Yachts with a length of less than 24m.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 97 pages — is available in the English PDF.

Similar standards

How to Download GB/T 37438-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
97 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 37438-2019

$1,655.00