GB/T 37333-2019General technical specification of accessible facilities for railway passenger cars and multiple unit (English PDF)
铁道客车及动车组无障碍设施通用技术条件
This is a limited preview
Buy now to download the full PDF (21 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37333-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 25, 2019
Implementation date
July 1, 2019
Scope
GB/T 37333-2019 is the English-translated version of 铁道客车及动车组无障碍设施通用技术条件.
GB/T 37333-2019 sets the general technical requirements for the accessible facilities of railway passenger cars and multiple units, the fittings that let a passenger with reduced mobility travel.
It gives the terms and definitions, the general requirements and then the technical requirements for each facility: the accessible entrance and its ramp, the aisles and doorways, the wheelchair space and seating, the accessible toilet, the handrails and call devices, and the information given in visual and audible form.
It applies to railway passenger cars and multiple units, and other rail vehicles may use it for reference. Railway operators, car builders and accessibility inspectors use it. Issued on 25 March 2019, it has applied since 1 July 2019.
Found what you need?
Document preview — GB/T 37333-2019
National Standard of the People's Republic of China
- ICS
- 45.060.20
- Classification
- S 50
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 General requirements
- 5 Technical requirements
- 5.1 Barrier-free vehicle access
- 5.2 Accessible area door
- 5.3 Handicapped seat
- 5.4 slumbers for people with mobility impairments
- 5.5 wheelchair seating
- 5.6 Barrier-free bathroom
- 5.7 Accessible Washing Room
- 5.8 Baby Care Desk
- 5.9 Handrail
- 5.10 Passenger Information
- 5.11 Calling device
- Appendix A (informative appendix) Accessible area vehicle sign
- Reference
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the terms and definitions, general requirements and technical requirements for barrier-free facilities for railway passenger cars and EMUs.
This standard applies to railway passenger cars and EMUs. Other rail passenger cars can be used as reference.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2893.3-2010 Graphical symbols - Safety colours and safety signs - Part 3 (ISO 3864-3:2006, MOD)
GB 2894-2008 Safety signs and guidelines for their use
GB/T 10001.1-2012 Public information graphic symbols - Part 1. General symbols
GB/T 10001.9-2008 Graphical symbols for public information - Part 9.
GB 14166-2013 Seat belts for restraints, restraint systems, child restraint systems and ISO FIX child restraint systems for motor vehicles
GB/T 15720-2008 Chinese Braille
GB/T 28791-2012 railway vehicle sign
GB 50763-2012 Accessibility Design Specification UIC565-3.2003 Technical description of passenger car compartment layout with functions for carrying disabled persons in wheelchairs (Specialdesign) Andfittingsfeaturesofvehiclesacceptedforuseininternationalpassengernighttraffic)
3 Terms and definitions
The following terms and definitions as defined in GB 50763-2012 apply to this document and are listed below for ease of use. Certain terms and definitions in GB 50763-2012.
3.1 The mobility impaired
Social special travellers such as the disabled, the elderly, the injured, the children, the pregnant women and the infants.
3.2 Accessible facilities
A facility designed to facilitate people with mobility disabilities to participate in normal activities.
3.3 Accessible area
An area with barrier-free access, access, handrails, wheelchair seats, and toilets.
3.4 Accessible vehicle
Set up railway cars and EMUs in barrier-free areas.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2893.3-2010Graphical symbols -- Safety colours and safety signs -- Part 3: Design principles for graphical symbols used in safety signs
- GB 2894-2008Safety colours and safety signs
- GB/T 10001.1-2012Public information graphical symbols - Part 1: General symbols
- GB/T 10001.9-2008Public information graphical symbols - Part 9: Symbols for accessible facilities
- GB 14166-2013Safety-belts and restraint systems for occupants of power-driven vehicles
- GB/T 28791-2012Signs of rolling stock - Vehicles and multiple units
GB/T 15720-2008
Similar standards
How to Download GB/T 37333-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 50763-2012 — Codes for Accessibility Design
GB/T 2893.3-2010 — Graphical symbols -- Safety colours and safety signs -- Part 3: Design principles for graphical symbols used in safety signs
GB/T 7251.4-2026 — Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
Secure payment via Stripe
Payments accepted
GB/T 37333-2019
$235.00