GB/T 37322-2019Test method for evaluating gasoline cleanliness - Simulation test of intake valve deposit (IVD) of gasoline engine (English PDF)
汽油清净性评价 汽油机进气阀沉积物模拟试验法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37322-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 25, 2019
Implementation date
October 1, 2019
Scope
GB/T 37322-2019 is the English-translated version of 汽油清净性评价 汽油机进气阀沉积物模拟试验法.
GB/T 37322-2019 is the Chinese standard "Test method for evaluating gasoline cleanliness - Simulation test of intake valve deposit (IVD) of gasoline engine".
Its scope clause reads: This document describes a simulation test method using a port-fuel-injected gasoline engine setup to evaluate the intake valve deposit-forming tendency of gasoline engine.
This document is applicable to the evaluation of the cleanliness of automotive gasoline and gasoline detergents. Its clauses include terms and definitions; method summary; test conditions; instruments and equipment; reagents and materials; preparations.
Found what you need?
Document preview — GB/T 37322-2019
National Standard of the People's Republic of China
- ICS
- 75.160.20
- Classification
- E 31
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Summary of test method
- 5 Apparatus and equipment
- 5.1 Test equipment
- 5.2 Apparatus
- 6 Reagents and materials
- 7 Sampling
- 8 Preparation
- 9 Test steps
1 Foreword
GB/T 37322-2019 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 25 March 2019 and has been in force since 1 October 2019.
This standard was proposed by and is under the jurisdiction of SAC/TC 280 National Technical Committee on Petroleum Products and Lubricants of Standardization Administration of China.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Introduction
This method is developed to judge the tendency of gasoline deposits on engine intake valves by the amount of the deposits generated by simulating the process of generating deposits on the intake valve of an intake injection engine; it is applied for the evaluation of gasoline cleanliness and the development of gasoline detergents. Compared with the engine test, this method has the advantages such as short test time, small amount of samples, and low investment in instruments and equipment.
Warning —— This standard involves some dangerous materials, operations and equipment, but it does not purport to address of the safety concerns, if any, associated with its use. Therefore, it is the responsibility of the user of this standard to establish appropriate safety and protection measures and determine the applicability of regulatory limitations prior to use.
3 Scope Preview
This standard specifies the simulation test for intake valve deposits (IVD) in intake injection gasoline engine, which is used to evaluate the tendency of deposits on gasoline engine intake valves. This standard is applicable to vehicle gasoline and vehicle gasoline detergents. Note: The applicability of this standard to the test conditions of vehicle ethanol gasoline has not yet been identified, and needs be verified in the relevance to the engines.
GB/T 37322-2019 falls under ICS 75.160.20, in the field of petroleum and related technologies.
This catalogue holds 836 other GB/T standards in that field.
In this catalogue, GB/T standards carry edition years from 1963 to 2026.
4 Normative references
GB/T 4756 — Method for manual sampling of petroleum liquids
GB 17930 — Gasoline for motor vehicles
GB/T 19230.6 — Test method for evaluating gasoline detergent in use - Part 6: Engine dynamometer test method for influence of intake valve and combustion chamber deposit tendencies of gasoline detergent (M111 method)
5 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
English translation: about 15 pages
6 Related standards
Other editions:
GB/T 37322-2026 (later edition)
7 Classification and status
International classification (ICS): 75.160.20
Chinese Standard Classification (CCS): E 31
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 37322-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 37322-2019
$245.00