Valid

GB/T 37288-2019Testing requirement and methods for radio electromagnetic environment in border areas (English PDF)

边境(界)地区无线电电磁环境测试要求和测试方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37288-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 25, 2019

Implementation date

October 1, 2019

Scope

GB/T 37288-2019 is the English-translated version of 边境(界)地区无线电电磁环境测试要求和测试方法.

GB/T 37288-2019 is the Chinese standard "Testing requirement and methods for radio electromagnetic environment in border areas". Its scope clause reads: This standard specifies the quantitative testing of the radio characteristics and usage of related terrestrial radio services in China's border (boundary) areas.

Test method. This standard applies to terrestrial radio services in the VHF/UHF (30MHz~3000MHz) frequency band. According to the needs of the test task, Expand to lower frequencies such as medium and short wave (below 30MHz) or higher frequencies such as microwave (above 3000MHz). Its clauses include terms, definitions and abbreviations.

Found what you need?

Document preview — GB/T 37288-2019

National Standard of the People's Republic of China

ICS
33.050
Classification
M 30

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms, definitions and abbreviations
  • 3.1 Terms and Definitions
  • 3.2 Abbreviations
  • 4 working procedures
  • 5 General test methods for radio services
  • 5.1 Test Requirements
  • 5.2 Test Step
  • 6 Broadcast Service Test Method
  • 6.1 Test Requirements
  • 6.2 Test Step
  • 7 Public mobile communication service test method
  • 7.1 Test Requirements
  • 7.2 Test Step
  • 8 test report and data processing requirements
  • 8.1 Electromagnetic environment test report requirements for border (boundary) areas
  • 8.2 Data Processing Requirements
  • Appendix A (normative appendix) Main contents of the electromagnetic environment test report in the border area
  • Appendix B (Normative Appendix) Report on the Electromagnetic Environment Test Report of the Border (Boundary) Region
  • Appendix C (informative) Test system sensitivity measurement
  • Appendix D (informative) Signal bandwidth and detection method
  • Appendix E (informative) Power and field strength conversion formulas at different antenna heights
  • Appendix F (informative appendix) Field strength, power conversion formula

1 Scope

This standard specifies the quantitative testing of the radio characteristics and usage of related terrestrial radio services in China's border (boundary) areas.

Test method.

This standard applies to terrestrial radio services in the VHF/UHF (30MHz~3000MHz) frequency band. According to the needs of the test task,

Expand to lower frequencies such as medium and short wave (below 30MHz) or higher frequencies such as microwave (above 3000MHz).

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 14109-1993 TV, FM broadcast field strength measurement method

ITU-R Radio Regulations (2012) [RadioRegulation (2012)]

3 Terms, definitions and abbreviations

3.1 Terms and definitions

The following terms and definitions apply to this document.

3.1.1 Radio monitoring

Using technical means to search, measure, analyze, and identify radio signals, and to locate and locate radio wave sources to obtain

Take its technical parameters, functions, categories, locations and uses.

3.1.2 Fixed monitoring station

Set up a radio monitoring station that performs monitoring at a fixed location.

3.1.3 Transportable monitoring system

The monitored radio monitoring system can be temporarily set up and implemented in different locations.

3.1.4 Mobile monitoring station

A radio monitoring station that is placed in the vehicle to perform monitoring while on the move.

3.2 Abbreviations

The following abbreviations apply to this document.

BCCH. Broadcast Control Channel (BroadcastControlChannel)

BID. Base Station Number (BaseStationIdentificationCode) […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Similar standards

How to Download GB/T 37288-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 37288-2019

$360.00