GB/T 37052-2018Test methods for nominal module operating temperature of building integrated photovoltaic(BIPV) modules (English PDF)

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the test method for the rated working temperature of the photovoltaic building integrated component battery, including terms and definitions, testing principles, and testing. Test equipment, sample preparation, test procedures and test reports.

This standard applies to photovoltaic building integrated planar double-layer laminated glass components, including crystalline silicon solar cell components and amorphous silicon solar cells. Pool component. Other types of flat double-layer laminated glass film components can be used as reference.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 6495.9 Photovoltaic devices - Part 9: Performance requirements for solar simulators

IEC 61215-1:2016 Design and identification of ground photovoltaic modules - Part 1: Test requirements

IEC 61853-2:2016 Photovoltaic modules - Performance testing and energy assessment - Part 2: Spectral response, incident angles and component operating temperatures Measurement

3 Terms and definitions

The following terms and definitions apply to this document.

4 Test principle

Simulate natural light indoors with a steady-state solar simulator with excellent spectral matching, uniformity and stability, and control the temperature and wind control equipment Provide test environment such as ambient temperature, wind speed and direction, etc., so that components working near the maximum power point are in the NMOT-defined ring.