GB/T 36716-2018General principles for energy conservation assessment—Coal-fired power generation project (English PDF)
节能评估技术导则 燃煤发电项目
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36716-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 17, 2018
Implementation date
April 1, 2019
Scope
GB/T 36716-2018 is the English-translated version of 节能评估技术导则 燃煤发电项目.
GB/T 36716-2018 sets out what the energy conservation assessment of a coal-fired power generation project has to contain and the requirements it has to meet. It applies to new, rebuilt and expanded projects, including condensing power projects, projects that use coal gangue for power generation and projects that also carry a heat load.
The assessment starts with preparation: its scope must match the scope of the investment, the energy use boundary must be clearly defined, and where the project is built on existing facilities their energy consumption is included too; basic information on the project's conditions and energy use is then collected.
It relies on national standards for comprehensive energy consumption calculation, enterprise energy balance, energy metering and the energy consumption limits of coal-fired generating units. It was issued on 17 September 2018 and has applied since 1 April 2019.
Found what you need?
Document preview — GB/T 36716-2018
National Standard of the People's Republic of China
- ICS
- 27.010
- Classification
- F 01
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Energy Conservation Assessment Contents and Requirements
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the content and requirements for energy conservation assessment of coal-fired power generation projects.
This standard is applicable to new or modified or expanded coal-fired power generation projects, including condensing power generation projects, coal gangue comprehensive utilization power generation projects, and Energy efficiency assessment with a certain heat load power generation project.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2589 General rules for comprehensive energy consumption calculation
GB/T 3484 Enterprise Energy Balance General
GB/T 15587 Energy Management Guidelines for Industrial Enterprises
GB 17167 Energy-using unit energy metering equipment management and general rules
GB 21258 conventional coal-fired generating unit unit product energy consumption limit
GB/T 21369 Energy measurement equipment provision and management requirements for thermal power generation enterprises
GB/T 23331 Energy Management System Requirements
GB/T 28749 enterprise energy balance network diagram drawing method
GB/T 28750 Energy Measurement and Verification Technology General
GB/T 28751 Enterprise Energy Balance Table Preparation Method
GB/T 31341 Energy Conservation Assessment Technical Guidelines
DL/T 1365 terminology power saving
DL/T 5153 Technical Specifications for Power Plant Design of Thermal Power Plants
3 Terms and definitions
The terms and definitions defined in GB 21258, GB/T 31341 and DL/T 1365 apply to this document.
4 Energy Conservation Assessment Contents and Requirements
4.1 Preparation
4.1.1 Determining the scope of energy conservation assessment
Clear the scope of energy conservation assessment, the scope of energy conservation assessment should be consistent with the scope of investment; clearly define the energy use boundary and reflect the integrity of the project.
When the project is built on the existing facilities, the energy consumption of the relevant existing facilities should also be included in the assessment.
4.1.2 Collecting basic materials
Collecting relevant information on the basic conditions and energy consumption of coal-fired power generation projects mainly involves the following aspects. […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2589General rules for calculation of the comprehensive energy consumption
- GB/T 3484The general principles for energy balance of enterprise
- GB/T 15587Energy management systems - Guidelines for a phased implementation
- GB 17167General rules for energy measuring instrument equipping and managing of energy user
- GB 21258Norm of energy consumption per unit production of coal-fired power generation
- GB/T 21369Specification for equipping and managing of measuring instrument of energy in fossil power plants
Similar standards
How to Download GB/T 36716-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
DL/T 1365-2014 — Terminology of energy saving for electric power
DL/T 5153-2014 — Technical code for the design of auxiliary power system of fossil-fired power plant
GB 17167-2025 — General rules for energy measuring instrument equipping and managing of energy user
Secure payment via Stripe
Payments accepted
GB/T 36716-2018
$235.00