GB 21258-2024Norm of energy consumption per unit production of coal-fired power generation (English PDF)
燃煤发电机组单位产品能源消耗限额
This is a limited preview
Buy now to download the full PDF (11 pages)
Need quotation for your management?
Get a formal quotation for GB 21258-2024 in 30 minutes.
Issued by
State Administration for Market Regulation; Standardization Administration of China
Level / Type
National · Mandatory
Issue date
September 29, 2024
Implementation date
April 1, 2025
Scope
GB 21258-2024 is the English-translated version of 燃煤发电机组单位产品能源消耗限额.
GB 21258-2024 specifies the grades of energy consumption limit, the technical requirements, the statistical scope and the calculation methods for the energy consumption per unit product of coal-fired power generating units, and applies to the calculation and assessment of their net coal consumption rate and heating coal consumption rate and to energy control of newly built units; it does not apply to back-pressure units or resource comprehensive utilization units.
Clause 3 defines the net and heating [standard] coal consumption rates, the load coefficient, the heat-supply ratio, the heat and power ratio and the efficiency of steam extraction.
Table 1 sets three grades by pressure parameter and capacity class, from ultra-supercritical 1 000 MW (net coal consumption <= 268, <= 276 and <= 283 gce/(kW·h)) to ultra-high pressure units (grade 3 <= 352 gce/(kW·h)), with heating coal consumption of <= 40, <= 40.5 and <= 42 or <= 42.5 kgce/GJ, plus increments for W-flame and circulating fluidized bed boilers; units in service must meet grade 3 corrected by the factors of 5.3, while grade 2 applies to new, expanded and reconstructed units.
The document also covers the influencing factors and correction coefficients, including a new altitude correction and a net coal consumption correction for heat-supply units, the statistical scope and calculation methods, and implementation.
It replaces GB 21258-2017 and GB 35574-2017, merging the combined heat and power norm into this standard. Issued on 29 September 2024, in force since 1 April 2025.
Classification: ICS 27.010, CCS F01. The document runs to 11 pages, delivered complete in English translation.
Found what you need?
Document preview — GB 21258-2024
National Standard of the People's Republic of China
- ICS
- 27.010
- Classification
- F01
- Replacing
- GB 21258-2017, GB 35574-2017
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Grades of the energy consumption quota
- 5 Technical requirements
- 6 Statistical scope and calculation method
- 7 Implementation of the standard
3 Terms and definitions
4 Grades of the energy consumption quota
5 Technical requirements
6 Statistical scope and calculation method
7 Implementation of the standard
Foreword
This document is drafted in accordance with the rules given in GB/T 1.1-2020 "Directives for standardization - Part 1: Rules for the structure and drafting of standardizing documents".
This document replaces GB 21258-2017 "Norm of energy consumption per unit product of general coal-fired power generation set" and GB 35574-2017 "Norm of energy consumption per unit product of combined heat and power generation". Compared with GB 21258-2017 and GB 35574-2017, apart from structural adjustments and editorial changes, the main technical changes are as follows:
a) the scope of application of the standard has been changed (see Clause 1; Clause 1 of GB 21258-2017 and of GB 35574-2017);
b) terms and definitions have been added (see Clause 3);
c) the indicator values of the energy consumption grades have been changed (see Clause 4; Clause 4 of GB 21258-2017 and of GB 35574-2017);
d) the technical requirements for the energy consumption limit value have been changed (see 5.1; 5.1 of GB 21258-2017 and 5.2 of GB 35574-2017);
e) the technical requirements for the energy consumption access value have been changed (see 5.2; 5.2 of GB 21258-2017 and 5.3 of GB 35574-2017);
f) the influencing factors and correction coefficients of the energy consumption limit values have been changed (see 5.3; 5.3 of GB 21258-2017 and 5.4 of GB 35574-2017);
g) an altitude correction coefficient has been added (see 5.3.5);
h) a method for correcting the net coal consumption of heat-supply units has been added (see 5.3.6).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing body of this document shall not be held responsible for identifying any or all such patent rights.
This document was proposed by and is under the jurisdiction of the Standardization Administration of China.
The previous editions of this document and of the documents it replaces are as follows:
- first issued in 2007 as GB 21258-2007 "Norm of energy consumption per unit product of general coal-fired power generation set", first revised in 2013 and second revised in 2017;
- this is the third revision, which incorporates the content of GB 35574-2017 "Norm of energy consumption per unit product of combined heat and power generation".
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 11 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2589General rules for calculation of the comprehensive energy consumption
- GB/T 12723General principles for establishing allowance of energy consumption per unit throughput
- DL/T 904Calculating method of economical and technical index for thermal power plant
- DL/T 1365Terminology of energy saving for electric power
- DL/T 1752Calculating method of energy efficiency designing index for combined heat and power generation
- DL/T 1929Energy efficiency evaluation method for coal-fired units
Similar standards
Editions of GB 21258
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB 21258-2024 | Norm of energy consumption per unit production of coal-fired power generation | current edition | Current |
| GB 21258-2017 | The norm of energy consumption per unit product of general coal-fired power set | previous edition | Superseded |
| GB 35574-2017 | The norm of energy consumption per unit product of combined heat and power generation | merged into this edition | Superseded |
This page sells the current edition, GB 21258-2024. Earlier editions are listed for reference only.
How to Download GB 21258-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
DL/T 1365-2014 — Terminology of energy saving for electric power
DL/T 1752-2017 — Calculating method of energy efficiency designing index for combined heat and power generation
DL/T 1929-2018 — Energy efficiency evaluation method for coal-fired units
Secure payment via Stripe
Payments accepted
GB 21258-2024
$175.00