Valid

GB/T 36427-2018Specification for conformance test of IoT household electrical appliance (English PDF)

物联网家电一致性测试规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 36427-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 7, 2018

Implementation date

January 1, 2019

Scope

GB/T 36427-2018 is the English-translated version of 物联网家电一致性测试规范.

GB/T 36427-2018 sets out how to test IoT household electrical appliances for conformance, that is, whether appliances, gateways and service platforms from different types and different makers actually work together.

The test checks conformity with the IoT appliance standards GB/T 36429-2018, GB/T 36424.1-2018, GB/T 36430-2018 and GB/T 36428-2018, and is judged mainly by functional verification in a simulated real application environment.

It describes the test set-up, with the appliance under test, an IoT appliance gateway and a control terminal using the same communication protocol, the test connection diagram and the test methods and requirements.

It is a minimum set of basic functional tests: product quality is still tested to the product standards, and the lower network layers are left to the protocols themselves. It was issued on 7 June 2018 and has applied since 1 January 2019.

Found what you need?

Document preview — GB/T 36427-2018

National Standard of the People's Republic of China

ICS: 97.030
Classification: Y 60

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword3
1 Scope4
2 Normative References4
3 Terms and Definitions4
4 Test Instructions5
4.1 General5
4.2 Test application range5
5 Test Processes5
5.1 Test device5
5.2 Test connection diagram6
5.3 Test methods and requirements6

Foreword

This Standard was drafted as per the rules specified in GB/T 1.1-2009.

1 Scope

This Standard specifies the test methods and test procedures for the compliance of IoT Household Electrical Appliance.

This Standard is applicable to the interoperability test of the IoT Household electrical appliances.

2 Normative References

The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document.

GB/T 30246.7-2013 Home Network - Part 7. Control Network Communication Protocol

GB/T 33745-2017 Internet of Things - Terminology

GB/T 36429-2018 System Architecture and Application Model of IoT Household Electrical Appliance

GB/T 36424.1-2018 Interface Requirements of IoT Household Electrical Appliance -Part 1. Interface between Control System and Communication Module

GB/T 36430-2018 Device Description File of IoT Electrical Appliance

GB/T 36428-2018 Public Instruction Set of IoT Household Electrical Appliance

3 Terms and Definitions

The terms and definitions stipulated in GB/T 33754-2017 are applicable to this document.

4 Test Instructions

4.1 General

The conformance test for IoT household electrical appliance is to verify the interoperability of equipment among different types and different providers in the IoT household electrical appliance system complying with GB/T 36429-2018, GB/T 36424.1-2018, GB/T 36430-2018, GB/T 36428-2018. The conformance test results shall be judged mainly by the functional verification; the test shall be performed through simulating the actual application environment.

4.2 Test application range

The test is mainly for the application test and interoperability test of IoT household electrical appliances, IoT household electrical appliance gateways, IoT household electrical appliance service platforms.

This Standard is only a minimum set tests for basic functional testing.

After passing the test specified in this Standard, different devices of the same manufacturer and different devices of different manufacturers can interoperate on the same interoperability platform; while the product quality shall be tested as per the relevant product standards.

The network layer function is provided by the communication module; the physical layer can use the wire or wireless mode; the protocols among the physical layer, data link layer and network layer can use the existing control network protocol. GB/T 30246.7-2013, zigbee, Lonworks, BACnet, CAN, and other control network protocols; the specific test method can refer to the corresponding protocol requirements; this Standard doesn't describe them.

5 Test Processes

5.1 Test device

The test in this Standard requires an IoT household electrical appliance, an IoT household electrical appliance gateway, a control terminal with the same communication protocol; the control terminal has been connected to the IoT household electrical appliance gateway. Thereof, the IoT household electrical appliance gateway and control terminal are testing devices; while the IoT household electrical appliance is tested device. […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

GB/T 24986.7-2026|GB/T 45354.2-2026|GB/T 47775-2026|GB/T 47776-2026|GB/T 47778-2026|GB/T 21551.8-2025

How to Download GB/T 36427-2018

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.